Abstract:The occurrence of structural defects in selective laser melting (SLM) damages the mechanical properties and fabrication accuracy of components and is closely related to the processing parameters. Therefore, having a good grasp of the interaction mechanism between the material and laser is useful for designing an improved process window. In this study, we experimentally investigated the relationship between the samples' macro- and microstructure and their mechanical properties under low energy inputs, and the response behaviour of as-built parts under these parameters was calculated using a thermal fluid flow (TFF) model with a modified and surface-tracking heat source. The results showed that Ti6Al4V parts obtained via SLM under low energy inputs exhibited a strong relationship between the macro- and microstructure and the mechanical properties. Single-track TFF models were built to better understand the underlying phenomena that are influenced by process parameters and then affects the depositing process. The models provided insight into the thermal history, deposition behaviour, densification, size accuracy, and surface morphology and by considering the velocity field, the phenomenon of powder adhesion caused by the Bernoulli effect could be investigated. Interestingly, the TFF model with a volume energy density (Ev) of 90 J/mm3 captured the formation of pores, however, high smoothness of the surface and size accuracy was obtained in the sample. It can be proved that densification is hardly related to the surface morphology or the fabrication precision. In addition, our experiments showed that the fabrication process was less sensitive to process parameters at Ev = 38 J/mm3. Densification was also more sensitive to the laser power than to the scanning speed. The results suggest that good-quality samples can be synthesised via SLM under low energy inputs, and the TFF model is a powerful tool for the systematic optimisation of the process parameters. Our findings could be applied to improve the controllability of the overhang surface with severe powder adhesion in further studies.

Mechanics Study on Leveling Process by A Roller During Selective Laser Forming

Selective Laser Melting under Variable Ambient Pressure: A Mesoscopic Model and Transport Phenomena

Experimental Investigation on Friction Behavior of Selective Laser Sintering Processed Parts

The relationship between the macro- and microstructure and the mechanical properties of selective-laser-melted Ti6Al4V samples under low energy inputs: Simulation and experiment

Coupling Analysis on Microstructure and Residual Stress in Selective Laser Melting (SLM) with Varying Key Process Parameters

Formation mechanism of pore defects and surface ripples under different process parameters via laser powder bed fusion by numerical simulation and experimental verification

Self-Regulation-Effect in Laser Direct Metal Manufacturing

Improvement on Selective Laser Sintering and Post-Processing of Polystyrene

Laser Direct Forming of Metal Components: Technical Characterizations

Experimental and Numerical Study on Fragmentation Mechanism of Copper Sheet in Laser Dynamic Forming

An investigation on the friction in a micro sheet metal roll forming processes considering adhesion and ploughing

Surface Evenness Control of Laser Solid Formed Thin-Walled Parts Based on the Mathematical Model of the Single Cladding Layer Thickness

An Experimental Investigation into Residual Stress Control of 24CrNiMo Alloy Steel by Selective Laser Melting

Study on mechanical properties after laser forming

Experimental and computational study on thermal and fluid behaviours of powder layer during selective laser melting additive manufacturing

Effect of Process Parameters on Residual Stresses, Distortions, and Porosity in Selective Laser Melting of Maraging Steel 300

The Influences of Processing Parameters on Forming Characterizations During Laser Rapid Forming

Porosity, Hardness, Friction and Wear Performance Analysis of H13 SLM-Formed Samples

Analysis of brittle layer forming mechanism in Ti6Al4V sloping structures by SLM technology

Study of residual stress in selective laser melting of Ti6Al4V

Study of the Effect of Selective Laser Melting Process Parameters on Overhang Structures