Abstract:The inadequacy of the existing research in characterizing the atomization performance of the whole atomization field by the local region at nozzle axis hinders the improvement of dust removal performance of a spray system, especially for fan-shaped nozzles with large atomization angle. To solve this inadequacy, 88 measuring points were designed in this study to reveal the spatial distribution characteristics of atomization parameters of a fan-shaped pressure atomization nozzle using a 3D Fiber Phase-Doppler Anemometer. Moreover, the atomization performance and dust removal performance of the whole atomization field under different spray pressures were characterized. The results showed that the spatial distribution of atomization parameters in the axis and radial direction of the nozzle was inhomogeneous. As the axial distance from the nozzle outlet increased, the average droplet size showed a trend of first decreasing and then increasing, the proportion of the droplet of 15-70 μm showed a trend of first increasing and then decreasing, while the average droplet velocity and droplet flux showed a decreasing trend. In addition, the spray orientation was perpendicular to gravity, and the atomization field was parallel to gravity, resulting in a significant difference in the average droplet size between the upper region and the axis. Compared with the upper and lower regions, the atomization effect at the axis was superior, manifested by higher average droplet velocity and droplet flux, indicating that characterizing nozzle atomization performance with atomization parameters at the axis will lead to overestimation. The increase of spray pressure can improve atomization performance and dust removal efficiency to a certain extent, but the improvement effect had a limit. The atomization field can be divided into atomization region, expansion region and contraction region, and the expansion region was considered as an effective dust removal region. These findings provide reference for the design and operation of a spray system.

An Experimental Study of Atomization Characteristics of the Ultrasonic Spray Nozzle

Measurement of Atomization Characteristics on Water Mist Fire Suppression Nozzle

EMULATIONAL AND EXPERIMENTAL STUDY OF NEW WATER MIST SPRAY NOZZLE FOR FIRE SUPPRESSION

Study on the Atomization Characteristics of High-pressure Nozzle with an In-line Distributor

INVESTIGATION OF ATOMIZATION PERFORMANCE ON A CENTRIFUGAL FUEL SLINGER WITH A PHASE DOPPLER ANEMOMETER

Acoustic emission detection and CFD simulation of a liquid spray process

Investigation of electrostatic-assisted ultrasonic atomization and spraying

Spatial distribution and transient evolution of sub-droplet velocity and size in ultrasonic atomization

Three-Dimensional Simulation Of Effervescent Atomization Spray

Effects of Atomization Injection on Nanoparticle Processing in Suspension Plasma Spray

Numerical Models For Viscoelastic Liquid Atomization Spray

Internal mixing air-assisted spray nozzle for large droplets: Experimental measurements and numerical simulations

Experimental Study on a New-type of Fan-shaped Spray Atomizer

Heat Transfer in a Novel Microwave Heating Device Coupled with Atomization Feeding

Experimental study on the atomization characteristics and dust removal efficiency of a fan-shaped nozzle for purifying working environment

Experimental research on surface acoustic wave microfluidic atomization for drug delivery

EFFECTS OF LIQUID PROPERTIES ON DROP MEAN DIAMETER IN EFFERVESCENT ATOMIZATION SPRAY

The study of a lime slurry atomization nozzle and its characteristics

Numerical study on the atomization mechanism and energy characteristics of synthetic jet/dual synthetic jets

Research on the Spray Cone's Characteristics of the Photoresist Saving-oriented Ultrasonic Atomizing Spraying Process

Spray characteristics of an ultrasonic microdroplet generator with a continuously variable operating frequency