Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. Tractors are widely used for agricultural activities worldwide by farmers. The cabin mount of a tractor supports the weight of the cabin and isolates vibrations from the chassis. In this study, the cabin mount-shape parameters were optimized considering its design characteristics to reduce vibration and noise inside the cabin. Additionally, vibration and noise tests were conducted to evaluate the improvement in isolation performance owing to the optimization. The nonlinear material constants of the Mooney–Rivlin hyperelastic model were obtained through tensile tests on rubber materials. A finite element model of the cabin mount was developed, and an analysis model was constructed to derive the vertical and lateral stiffness and displacement transmissibility through static and dynamic analyses using the ABAQUS program. The shape parameters influencing vertical and lateral stiffness were determined, and an objective function to minimize displacement transmissibility was defined for optimization. The vertical and lateral displacement transmission rates of the mount were successfully decreased through the optimization. The noise and vibration test results indicate that the cabin noise decreased by approximately 1–2 dB, while vibrations in the frequency range below 100 Hz were reduced by more than 3 dB in all directions. The proposed technique can help engineers and manufacturers improve driver comfort and mitigate the adverse effects of excessive noise and vibrations on their mental and physical health.

Vibration and Noise Damping Treatment for an Excavator Cab

Investigation of Noise Characteristics of Electric Vibrator Utilizing Acoustic Camera and Transfer Path Analysis

Investigation of Multi-Degree of Freedom Damped Dynamic Absorber Applied to Wheel Noise Control

Control of Noise at the Entrance or Exit of Parking Garages

Noise Reduction in the Cab of a Special Vehicle

Noise Reduction in Tractor Cabs Using Coupled Resonance Acoustic Materials

Research on prediction and optimization of low-frequency noise in loader cabs

Low-noise structure optimization of a heavy commercial vehicle cab based on approximation model

Measurement and optimization of nonlinear damping systems for agricultural engineering vehicle cab

Modeling of Acoustic Characteristics of a Cab with Response Surface Method and Its Application

THE STRUCTURAL VIBRATION ANALYSIS METHOD FOR VEHICLE'S NOISE FACTOR

Active Noise Control Using a Body-Mounted Vibration Actuator to Enhance the Interior Sound of Vehicle

Self-Tuning Pressure-Feedback Control by Pole Placement for Vibration Reduction of Excavator with Independent Metering Fluid Power System

Experimental study of the effect of viscoelastic damping materials on noise and vibration reduction within railway vehicles

Vibration Isolation Analysis and Optimization of Commercial Vehicle Cab Suspension System

Genetic algorithm-based shape optimization of rubber mount for tractor-cabin mounting system

Interior Noise Analysis of a Non-load Type Body SUV

Acoustic Topology Optimization of a Truck Cab Based on Coupled Panel Contribution Analysis

Avoiding the Health Hazard of People from Construction Vehicles: A Strategy for Controlling the Vibration of a Wheel Loader

Acoustic Modelling and Analysis of Vehicle Interior Noise Based on Numerical Calculation

Vibration Simulation Analysis and Optimization on Super Single Tire Tractor