Abstract:In the context of racing to carbon neutrality, the pipe-embedded building system makes the opaque envelopes gradually regarded as the multi-functional element, which also provides an opportunity for thermal insulation solutions to transform from high to zero-carbon attributes. Based on the re-examination of the heat transfer process of conventional pipe-embedded radiant (CPR) walls, the modular pipe-embedded radiant (MPR) wall integrated with thermal diffusive materials is proposed to enhance the heat transfer capacity of CPR walls in the direction parallel to the wall surface, thereby forming a more stable and continuous invisible thermal barrier layer inside the opaque envelopes. A comprehensive thermal and energy-saving analysis study regarding the influence mechanism of several key factors of MPR walls, e.g., the inclination angle of the filler cavity ( θ -value), geometry size of the filler cavity ( a:b -value) and thermal conductivity of the filler (λ f -value), is conducted based on a validated numerical model. Results show that the dynamic thermal behaviors of MPR walls can be significantly improved due to that the radial thermal resistance in the filler cavity of MPR walls can be reduced by 50%, while the maximum extra exterior surface heat loss caused by the optimization measures is only 2.1%. Besides, a better technical effect can be achieved by setting the major axis of the filler cavity towards the room side, where the interior surface heat load/total injected heat first decreases/increases and then increases/decreases with the increase of the θ -value. In particular, the MPR wall with θ L = 60° can obtain the best performance when other conditions remain the same. Moreover, the performance indicators of MPR walls can be further improved with the increase of the cavity size ( a:b -value), while showing a trend of rapid improvement in the λ f -value range of 2–5λ C and slow improvement increase in the λ f -value range of 5–12λ C . In addition, the improvement effect brought by optimizing the θ -value is more obvious as the a:b -value or λ f -value increases.

Optimization of Pass Design of Bidirectional Thermal-Insulation Bricks

Methods for Evaluating and Improving Thermal Performance of Wall-to-floor Thermal Bridges

Finite Element Analysis of 3D Heat Transfer of Typical Thermal Bridge of Self-Thermal Insulation in Hot-Summer and Cold-Winter Zone

EFFECT OF MASONRY MORTAR ON THERMAL INSULATION OF AAC MASONRY

Optimization of the Configuration of 290×140×90 Hollow Clay Bricks with 3-D Numerical Simulation by Finite Volume Method

Numerical Thermal Optimization of the Configuration of Multi-Holed Clay Bricks Used for Constructing Building Walls by the Finite Volume Method

Numerical Thermal Analysis of Applying Insulation Material to Holes in Hollow Brick Walls by the Finite-Volume Method

Numerical Study on Improving the Thermal Insulation Performance of Hollow Blocks by Optimizing the Holes Configuration

NUMERICAL SIMULATION OF OPTIMIZING CONFIGURATION OF HOLLOW CALY BRICKS

The Method of Reducing Heat Loss from Thermal Bridges in Residential Buildings with Internal Insulation in the Hot Summer and Cold Winter Zone of China

Comparative thermal analysis of extruded ceramic products between multi perforated brick and modified bricks in cells distribution

Optimizing Building Thermal Insulation: The Impact of Brick Geometry and Thermal Coefficient on Energy Efficiency and Comfort

Experimental and Numerical Studies on the Thermal Performance of Structural Insulated Panel Splines

Numerical study for influence of exterior insulation on equivalent thermal conductivity of hollow brick walls

Experimental Research on Seismic Response of Heat-Insulating Perforated Brick Full-Scale Walls with Openings

Design and thermal performance analysis of self-insulation concrete compound blocks

Analytical Optimization of the Transient Thermal Performance of Building Wall by Using Thermal Impedance Based on Thermal-Electric Analogy

Numerical simulation of concrete hollow bricks by the finite volume method

Analytical Optimization of Specific Heat of Building Internal Envelope

Thermal Performance Analysis for a New External Wall Insulation System

Dynamic thermal performance and energy-saving potential analysis of a modular pipe-embedded building envelope integrated with thermal diffusive materials