Abstract:In recent years, small modular reactors (SMRs) have garnered significant attention, and small modular natural circulation lead or lead-alloy-cooled fast reactors (LFRs) are among the potential choices for SMR development. However, the issue of metal corrosion in a high-temperature environment by liquid lead–bismuth eutectic (LBE) persists in small modular natural circulation LFRs. The primary current method for addressing this problem involves dissolving a certain amount of oxygen in LBE to form an oxide layer on the inner surface of the piping as a corrosion inhibitor. The structural evolution of the oxide layer on stainless steel surfaces under the influence of LBE is a complex nonlinear process. Existing experiments and research have indicated that the oxide layer is a biphasic oxide layer. However, due to the limited and scattered results from current experimental studies, predicting the long-term corrosion of steel in liquid lead–bismuth alloys remains a challenge. To further understand the formation principles of the biphasic oxide layer and the factors influencing its formation process, this study established a cellular automata model that combines surface growth and internal corrosion oxidation to simulate the corrosion of stainless steel, the diffusion of iron/oxygen elements on the oxide layer, and the precipitation of iron on the oxide layer using the cellular automata method. The diffusion process was simulated using a random walk model. The approximate characteristics of the evolution of the involved processes were explored based on the simulation results. The simulation results showed that the cellular automata method can accurately simulate the formation of the biphase oxide film in this complex process from a mesoscopic scale.

Computational Simulation of Corrosion Perforation in the Oil-Tank Bottom with Cellular Automata

Three dimensional cellular automaton for simulation of the multi-pit corrosion damage evolution

Corrosion behavior and cellular automata simulation of carbon steel in salt-spray environment

Simulation of Pitting Corrosion Under Stress Based on Cellular Automata and Finite Element Method

A simulation approach for corrosion-fatigue behaviour of metallic structures considering coupling effect

Microstructure Simulation and Experiment for the Weak Weld Joint of a Domed Storage Tank during an Explosion Based on the Cellular Automaton Method

Numerical Simulation and Prediction of Corrosion Behavior of Low-Carbon Steel Under Different Salt Spray Concentrations Based on Cellular Automata

2D and 3D cellular automata simulation on the corrosion behaviour of Ni-based alloy in ternary molten salt of NaCl–KCl–ZnCl2

Mechanical model and probability analysis of buried pipelines failure under uniform corrosion

Simulation of corrosion behavior of Fe–Cr–Ni alloy in binary NaCl–CaCl2 molten salt using a cellular automata method

Integrity Assessment of the Pipelines Containing an Isolated Corrosion Pit

Experiments and cellular automata simulation of corrosion and protection of Hastelloy X in high-temperature chloride molten salts

Contribution of cellular automata to the understanding of corrosion phenomena

Improved cellular automata modeling of corrosion/oxidation mechanism of stainless steel in LBE

Simulation Investigation on Environment-Induced Pitting Corrosion on the Metal Surface

A Corrosion Cracking Mechanism-Based Model with Molten Salt Corrosion Damage Coupling the Effect of Chloride Impurity and Plastic Deformation

Double Circular Arc Model Based on Average Shear Stress Yield Criterion and Its Application in the Corroded Pipe Burst

Data-driven Corrosion Failure Probabilistic Assessment Model for Reinforced Concrete Structures

Surface Stress Analysis of Internally Corroded Pipes under External Pressure

Life Prediction Method of Large Oil Storage Tanks In-service Based on Foundation Settlement Monitor

Molecular Dynamics Simulation of Reinforcing Steel Corrosion when Subjected to Both Chloride Attack and Mechanical Loading