Abstract:This study investigates the corrosion behavior of Ni-Cr binary alloys, including Ni-10Cr, Ni-15Cr, Ni-20Cr, Ni-25Cr, and Ni-30Cr, in a NaCl-KCl-MgCl2 molten salt mixture through gravimetric analysis. Corrosion tests were conducted at 700 °C, with the maximum immersion time reaching up to 100 h. The corrosion rate was determined by measuring the mass loss of the specimens at various time intervals. Verifying corrosion rates by combining mass loss results with the determination of element dissolution in molten salts using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). Detailed examinations of the corrosion products and morphology were conducted using X-ray diffraction (XRD) and scanning electron microscopy (SEM). Micro-area elemental analysis on the corroded surfaces was performed using an energy dispersive spectrometer (EDS), and the elemental distribution across the corrosion cross-sections was mapped. The results indicate that alloys with lower Cr content exhibit superior corrosion resistance in the NaCl-KCl-MgCl2 molten salt under an argon atmosphere compared to those with higher Cr content; no corrosion products were retained on the surfaces of the lower Cr alloys (Ni-10Cr, Ni-15Cr). For the higher Cr alloys (Ni-20Cr, Ni-25Cr, Ni-30Cr), after 20 h of corrosion, a protective layer was observed in certain areas. The formation of a stable Cr2O3 layer in the initial stages of corrosion for high-Cr content alloys, which reacts with MgO in the molten salt to form a stable MgCr2O4 spinel structure, provides additional protection for the alloys. However, over time, even under argon protection, the MgCr2O4 protective layer gradually degrades due to chloride ion infiltration and chemical reactions at high temperatures. Further analysis revealed that chloride ions play a pivotal role in the corrosion process, not only facilitating the destruction of the Cr2O3 layer on the alloy surfaces but also possibly accelerating the corrosion of the metallic matrix through electrochemical reactions. In conclusion, the corrosion behavior of Ni-Cr alloys in the NaCl-KCl-MgCl2 molten salt environment is influenced by a combination of factors, including Cr content, chloride ion activity, and the formation and degradation of protective layers. This study not only provides new insights into the corrosion resistance of Ni-Cr alloys in high-temperature molten salt environments but also offers significant theoretical support for the design and optimization of corrosion-resistant alloy materials.

2D and 3D cellular automata simulation on the corrosion behaviour of Ni-based alloy in ternary molten salt of NaCl–KCl–ZnCl2

Simulation of corrosion behavior of Fe–Cr–Ni alloy in binary NaCl–CaCl2 molten salt using a cellular automata method

Cellular Automata Simulation on the Corrosion Behavior of Ni-base Alloy in Chloride Molten Salt

Experiments and cellular automata simulation of corrosion and protection of Hastelloy X in high-temperature chloride molten salts

A Corrosion Cracking Mechanism-Based Model with Molten Salt Corrosion Damage Coupling the Effect of Chloride Impurity and Plastic Deformation

Numerical Simulation and Prediction of Corrosion Behavior of Low-Carbon Steel Under Different Salt Spray Concentrations Based on Cellular Automata

Simulation of Pitting Corrosion for Ni-Based Alloy Using A Cellular Automata Model

Corrosion behavior and cellular automata simulation of carbon steel in salt-spray environment

Temperature-Dependent Morphological Evolution during Corrosion of the Ni-20Cr Alloy in Molten Salt Revealed by Multiscale Imaging

Simulation of Metal Corrosion Layer Growth Behavior under High Temperature by Cellular Automaton Method

Corrosion Behavior of Ni-based Alloys in Molten NaCl-CaCl 2 -Mgcl 2 Eutectic Salt for Concentrating Solar Power

Comparison of Hot Corrosion Behavior of Ni36Fe34Al17Cr10Mo1Ti2 and Ni34Co25Fe12Al15Cr12W2 Alloys in NaCl–KCl–Na2SO4 Salt

Corrosion Behavior of Ni-Cr Alloys with Different Cr Contents in NaCl-KCl-MgCl2

Accelerated Discovery of Molten Salt Corrosion-resistant Alloy by High-throughput Experimental and Modeling Methods Coupled to Data Analytics

Integrated High‐Throughput and Machine Learning Methods to Accelerate Discovery of Molten Salt Corrosion‐Resistant Alloys

Determining oxidation states of transition metals in molten salt corrosion using electron energy loss spectroscopy

Three dimensional cellular automaton for simulation of the multi-pit corrosion damage evolution

Inter-phase Selective Corrosion of Γ-Tial Alloy in Molten Salt Environment at High Temperature

Corrosion Behavior of Dual-Phase Fe36Ni36Al17Cr10Mo1 Multi-Principal Component Alloy in LiCl–KCl–CsCl Molten Salt at 700 °C

Mechanistic study of moisture corrosion of FeCr alloys in molten salts by ab-initio molecular dynamics simulations

Nobility vs. mobility: Insights into molten salt corrosion mechanisms of high-entropy alloys via high-throughput experiments and machine learning