Abstract:Parameter and Waveform analysis of energy evolution. The objective of this paper is to analyze the mechanical properties and damage mechanisms of carbon fiber‐reinforced polyamide thermoplastic composite laminates. Four specimens with different ply orientations were designed for open‐hole tensile experiments, and interlaminar toughness experiments including double cantilever beam and end‐notched flexural were carried out. The experimental process was monitored synchronously using acoustic emission, and the strain field changes of the tensile specimens were captured using digital image correlation technology. The unsupervised clustering of the peak frequencies of the acoustic emission signals based on the K‐means++ algorithm was employed to ascertain the peak frequency ranges corresponding to the various damage modes. Typical signals from different specimens were selected, and the gray wolf algorithm was used to optimize the variational modal parameters to decompose the signals. The waveform characteristics, frequency components, and Hilbert spectra of each damage mode were given. The correlation analysis of the intrinsic mode function (IMF) components of the same damage in different specimens demonstrated that the IMF components exhibited high similarity. By analyzing the time series changes in the energy of each damage mode in different specimens, the contribution of different damage modes to the evolution of laminated plate damage was evaluated. Highlights The mechanical properties of CF/PA6 laminates were investigated based on open‐hole tensile specimens and pre‐cracked delamination specimens. Unsupervised clustering of AE peak frequencies using K‐means++ to establish the relationship between peak frequencies and damage patterns. AE counts and cumulative energy were used to assess damage evolution. By identifying a single damage signal and providing a more intuitive treatment of the damage energy evolution.

Damage Analysis for Multilayer Composite Material

Research About Key Factors In Jet Puncturing Process For Multilayer Composite Material

Research about jet flow mechanism and flow field analysis for layered composite materials

Damage and residual compressive strength of multi-layer composite laminates after low velocity impact

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Prediction Method for Re-Damage Behavior of the Repaired CFRP Bolted Joint

A progressive damage model for carbon fiber-reinforced polymer laminates subjected to fastener pull-through failure

Failure Analysis of Composite Laminate under Low-Velocity Impact Based on Micromechanics of Failure

The Fabrication and Microstructure Analysis of Carbon Fiber Composites with Interlaminar Reinforcement

Progressive damage analysis of double-layer variable thickness 3D woven composite scaled engine casing

Study on Optimization of Drilling Parameters for Laminated Composite Materials

A Multi-Scale Modeling Scheme for Damage Analysis of Composite Structures Based on the High-Fidelity Generalized Method of Cells

Investigation on damage behaviors of carbon fiber‐reinforced nylon 6 thermoplastic composite laminates using acoustic emission and digital image correlation techniques

Multi-Scale Modeling and Damage Analysis of Composite with Thermal Residual Stress

Damage Analysis of Carbon Fiber-Reinforced Thermoplastic Laminates under Bending Based on Acoustic Emission and Digital Image Correlation

Finite element analysis on impact response and damage mechanism of composite laminates under single and repeated low-velocity impact

Damage and Failure Analysis of Hybrid Laminates with Different Ply-Stacking Sequences under Low-Velocity Impact and Post-Impact Compression

Damage mechanism of carbon fiber reinforced plastic pipe based on reverse and forward curvature drilling

Efficient concurrent multiscale damage analysis of woven composite structures based on data-driven reduced order model

An explicit multi-phase field damage model for long fiber-reinforced composites

Investigation on the Progressive Damage and Bearing Failure Behavior of Composite Laminated Bolted Joints under Tension