Abstract:The present investigation was conducted on the low-speed impact response of quasi-isotropic [±45/0/90°]xs hybrid composite through laboratory level experimental tests. The purpose was to understand the behaviour that the different stacking sequences of hybrid glass/carbon fibre composites has on the ability of the material to sustain loads during low-speed impact events without developing critical structural failure in the material and improving the impact energy absorption properties, which is a relevant matter in aerospace and automotive industries. Drop-weight impact tests were carried out on two different laminates, with different stacking sequences, each of which were 16 symmetric inter-ply hybrid laminates named GC [+45G/−45C/0G/90C]4s and, respectively, G-C [+45G/−45G/0G/90G/+45C/−45C/0C/90C]2s, where G stands for glass fibre and C for carbon fibre. Both were comprised of epoxy matrix reinforced carbon/E-glass fibre woven fabric composites. The outcome of changing the hybrid stacking sequence, on the impact performances, was discussed. The damage morphologies and local failure mechanisms were analysed using visual inspection and a high-resolution laser scanner. Under 33 J impact energy, both tested hybrid composites exhibited approximately 10 kN peak load. Nevertheless, one key parameter, the time to peak load, significantly changed; the damage initiation threshold for GC samples occurred immediately before 6 kN, whereas for G-C samples this threshold appeared much earlier. This type of behaviour was partly connected to the delay in the propagation of delamination and fibre breakage, which was influenced by the high elastic energy absorption of the carbon fibres when compared with the glass fibres. The absorbed energy was higher for GC configuration, whereas a higher DI was observed for samples G-C indicating that a high percentage of the total energy was dissipated through the propagation of in-plane and out-of-plane fibre/matrix cracks. No perforation was observed on either configuration; nevertheless, the damage area significantly changed both in size and appearance from one configuration to another.

Damage and Failure Analysis of Hybrid Laminates with Different Ply-Stacking Sequences under Low-Velocity Impact and Post-Impact Compression

Numerical Study of the Damage Behavior of Carbon Fiber/Glass Fiber Hybrid Composite Laminates under Low-velocity Impact

A Progressive Damage Model of Composite Laminates under Low-Velocity Impact

Numerical Investigation on the Repeated Low-Velocity Impact Behavior of Composite Laminates

Predicting Damage Behaviors of Composite Laminates under Multiple Low‐velocity Impacts

Exploration of Several Influence Factors of Low-Velocity Impact Damage on Composite Laminates

Finite Element Analysis of a Modified Progressive Damage Model for Composite Laminates under Low-Velocity Impact

Low-velocity Impact Damage Analysis in Composite Laminates

Experimental and numerical response and failure of laterally impacted carbon/glass fibre-reinforced hybrid composite laminates

Predicting Post-Impact Compression Strength of Composite Laminates under Multiple Low-Velocity Impacts

Low-velocity Impact Analysis and Multi-Objective Optimization of Hybrid Carbon/basalt Fibre Reinforced Composite Laminate

Influence of Various Damage Mechanisms on the Low‐velocity Impact Response of Composite Laminates

Delamination Propagation Manipulation of Composite Laminates under Low-Velocity Impact and Residual Compressive Strength Evaluation

Design of Damage-Resistant Hybrid Lay-Up Structures for Fiber-Reinforced Composites Based on Interface Properties

Damage Propagation Behavior of Composite Honeycomb Sandwich Panels Under Low-Velocity Impact

Investigation on Layer Hybridization of Glass/Carbon Fibre Woven Reinforced Composites Subjected to Low-Speed Impact

Low‐velocity impact damage and compression after impact behavior of CF/PEEK thermoplastic composite laminates

The damage of low-velocity impacted cfrp laminates with different stacking sequences based on micro-mechanics of failure

Research on Low Velocity Impact Damage of Laminated Composite

Numerical investigation of the low-velocity impact damage resistance and tolerance of composite laminates with preloads

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact