Abstract:This paper presents an experimental and theoretical study of surface generation in the ultra-precision grinding of hard and brittle materials. The study takes into account the material properties, the relative vibration between the grinding wheel and the workpiece, the machining parameters and the phase shift of the grinding process. The Taguchi approach is employed to study the influence of machining parameters on the surface quality and shows that the feed speed and rotational speed of the workpiece are key factors. Experiments have been conducted to study individual variables, and the results further show that the feed rate and the cross-feed distance have a significant effect on surface generation. It is found that the spirals around the central area of the workpiece are the primary mechanism for surface generation, which originates from the synchronous relative tool-work vibration. The integral part of the ratio of the rotational speed of the grinding wheel to rotational speed of the workpiece determines the number of spirals and its fractional part controls the spiral geometry. A theoretical model for predicting the single spiral generation has been developed to explain the accumulation of the phase shift and the geometry. The changeable feed speed near the end of grinding is also modelled, revealing the approximate straight lines around one circle in the central region. The simulated results indicate that the theoretical models and the ground surfaces are in close agreement. The scallop-height model is developed to calculate the influence of phase shift on surface quality, and it is found that the phase shift near the medium value can effectively improve surface quality. Finally, a comparison of different surface generation mechanisms in grinding mould steel, tungsten carbide (WC) and reaction bonded silicon carbide (RB-SiC) is made. It is interesting to note that the Spanzipfel effect contributes to the surface generation not only on ductile materials such as mould steel but also on brittle materials such as WC and RB-SiC. The Spanzipfel effect is the most significant in grinding mould steel. For WC and RB-SiC, the ground surface contains both a ductile region and a brittle region in the form of micro-fractures.

Experiment Research on Surface Roughness in Micro-Grinding Metal Material

Experimental Research on the Effect of Grinding Parameters on Ceramic Machined Surface Roughness

Study on the system matching of ultrasonic vibration assisted grinding for hard and brittle materials processing

Study on Grinding Force Model in Ultrasonic Vibration Assisted Grinding for Ductile Materials

Study on Mechanism for Material Removal and Surface Generation by Molecular Dynamics Simulation in Abrasive Processes

Research on the System Matching Model in Ultrasonic Vibration-Assisted Grinding

Modeling and Simulation of Grinding Surface Topography Considering Wheel Vibration

Study on micro-grinding quality in micro-grinding tool for single crystal silicon

Surface Generation Analysis in Micro End-Milling Considering the Influences of Grain

An experimental and theoretical analysis of surface generation in the ultra-precision grinding of hard and brittle materials

Investigation of Modeling on Single Grit Grinding for Martensitic Stainless Steel

Analytical and experimental study on micro-grinding surface-generated mechanism of DD5 single-crystal superalloy using micro-diamond pencil grinding tool

Investigation on nano-grinding process of GaN using molecular dynamics simulation: Nano-grinding parameters effect

Simulation and experimental research on grinding force and grinding surface quality of TiC-coated micro-grinding tools

Surface roughness model of ultrasonic vibration-assisted grinding GCr15SiMn bearing steel and surface topography evaluation

A Processing Technical Analysis for the Characteristics of Forces and Surface Roughness in Micro-Scale Milling

The study on the influences of superabrasive grain spatial orientation for microcutting processes based on response surface methodology

Research on micro-grinding performance of 2.5D Cf/SiC composites

Research on calculation of grinding surface roughness

Analysis and optimization of microchannel array precision grinding processes with micro-structured micro-grinding tool

Atmospheric pressure plasma jet and minimum quantity lubrication assisted micro-grinding of quenched GCr15