Abstract:Ultrasonic-assisted grinding (UAG) is a suitable machining solution for hard and brittle materials, effectively reducing cutting forces and improving the machined surface quality. With the development of UAG system, multi-dimensional vibration devices have emerged and been applied in the machining of advanced materials. In this study, a discrete numerical model is proposed for two-dimensional ultrasonic-assisted grinding (2D-UAG) of silicon carbide (SiC) to describe the dynamic cutting behaviors and a grinding force model considering the material removal mechanism is further established. In the model development, the three-dimensional surface topography of grinding wheel is simulated and adopted to determine the cutting state of individual grit. Meanwhile, a workpiece profile update procedure and a novel approach to realize the decomposition and synthesis of grinding forces are proposed. Experimental validation demonstrates that the prediction error of this proposed model is limited within 11.14% with an average value of 8.16% under conventional machining parameters. Furthermore, the tool amplitude and workpiece amplitude affect the grinding force in a similar manner. As the ultrasonic amplitude increases from 1μm to 9μm, the grinding force declines first and then goes up and the inflection point appears around 5μm. The inherent characteristics of grinding forces in 2D-UAG of hard and brittle materials can be explained by obtaining the variation trends of the average cutting depth of individual grit and the number of active grains. The modeling methodology presented in this study provides a reference for studying the 2D-UAG process of brittle materials.

Study on Grinding Force Model in Ultrasonic Vibration Assisted Grinding for Ductile Materials

Study on the system matching of ultrasonic vibration assisted grinding for hard and brittle materials processing

Research on the System Matching Model in Ultrasonic Vibration-Assisted Grinding

Modeling of Grinding Force in Constant-Depth-Of-Cut Ultrasonically Assisted Grinding

Grinding force assessment in tangential ultrasonic vibration-assisted grinding gear: Analytical model and experimental verification

An Experimental Investigation on Ultrasonic Vibration-Assisted Grinding of Sio2f/Sio2 Composites

Grinding force model for ultrasonic assisted grinding of γ-TiAl intermetallic compounds and experimental validation

An Improved Cutting Force Model for Ultrasonically Assisted Grinding of Hard and Brittle Materials

Establishment of dynamic grinding force model for ultrasonic-assisted single abrasive high-speed grinding

A grinding force model in two-dimensional ultrasonic-assisted grinding of silicon carbide

An experimental investigation of system matching in ultrasonic vibration assisted grinding for titanium

Research on the Analytical Thermal Model in Surface Grinding by Cup Wheel

Effect of Ultrasonic Vibration Assisted Grinding Process on Surface Topography and Properties of C/SiC Composite

Study on force reduction mechanism in ultrasonic-assisted grinding based on single-grain scratching

Grinding force modeling in ultrasonic-assisted face grinding of ZrO2 ceramics and influence of grinding wheel wear on its accuracy

Mechanism study on ultrasonic vibration assisted face grinding of Hard and brittle materials

Analytical modeling of abrasive grain-workpiece cutting coefficient and experimental investigation on tangential ultrasonic vibration-assisted forming grinding gear

Intermittent cutting behavior and grinding force model in ultrasonic vibration-assisted grinding K4002 nickel-based superalloy

Study on Effects of Ultrasonic Vibration on Grinding Force

AAC theory for ultrasonic vibration-assisted grinding

Study on grinding performance during ultrasonic vibration-assisted grinding ultra-high strength steels