Abstract:Low cycle fatigue controlled by plastic strain is a main failure form of the forging die. Because affected by many factors, the damage process shows a randomicity. In this paper a stochastic fatigue damage analysis model is put forward based on the damage accumulation theory, in which the finite element method (FEM) and BP neural network are adopted. The distribution of stress, strain and temperature in the die during forging is analyzed with FEM. According to the results the location liable to failure can be found, the fatigue life of which is regarded as that of the forging die. After getting the definite damage, a three layered BP neural network is trained to simulate the damage process taking the variation of the die material's fatigue properties and the load cases into account. Based on the damage accumulation effect, the fatigue lives under different load cases can be gotten. As an example, a gear forging die is analyzed with this model. The distribution of failure frequency and the change of reliability with stroke times are gotten. The distribution law is approximate Weibull distribution. Next the effect of load cases on the distribution features, the mean value and the variation, is analyzed. Based on the results the reliability or the failure probability of the die can be derived, which gives a direction in reliability design and analysis of the forging die. The model can be used for life prediction and reliability analysis of the forging die.

Analysis for Fracture Behavior of Compactor Grinding Tooth Forging Die Based on Finite Element Method

The Finite Element Analysis Of Serrated Chip Formation In High-Speed Cuffing Auto Panel Dies

Stress Field Analysis of Extra-Height Forging Die Using Finite Element Method

Finite Element Analysis for 40 Mn Die Forging Press

Failure Analysis of A Die for Cold Precision Forging of Bevel Gears

Die Design for Cold Precision Forging of Bevel Gear Based on Finite Element Method

Numerical Simulation of GH4169 Alloy Disc Forging Process on Counterblow Hammer

3D Numerical Simulation of Axial Closed Dies Rolling Process for Disk Forging

STUDY ON THE NUMERICAL SIMULATION OF MULTI-STAGE ROTARY FORGING OF A NON-AXISYMMETRIC PART AND THE CAE ANALYSIS OF THE DIE STRENGTH

Research on the stress and strain evolution of aluminum alloy hot forging die

Prediction of Deformation Behavior and Microstructure Evolution in Heavy Forging by FEM

Analytical Solution of Thermo-Elastic-Plastic Deformation of the Combined Forging Die

Comparative Studies on Die Structure of Cold Forging Process Based on Fatigue Life Analysis

STOCHASTIC FATIGUE DAMAGE ANALYSIS OF THE FORGING DIE

Fracture Analysis of the Stamping Technology of a Certain Automobile Hubcap Part

Experimental study of wear characteristics of powder forging die and mechanism analysis

Analysis of Die Forging Process and FEA of Piston

Simulation Analysis for Effects of the Parameters on the Surface Temperature of a Hot Forging Die

Brittle Fracture Behaviors of Large Die Holders Used in Hot Die Forging

Research of Die Forging Trimming Transformation

Optimization on Forging Die of Engine Crankshaft and Research on Influence Factors of Wear