Experimental study of wear characteristics of powder forging die and mechanism analysis

Song WU,Feng WANG,Shao-bo MA,Qi-long LI,Wei XU

DOI: https://doi.org/10.3969/j.issn.1003-5060.2016.02.003

2016-01-01

Abstract:To study the wear characteristics and wear mechanism of powder forging dies ,through the preparation of pre-forging billet ,the design and manufacture of molds ,the experimental platform was set up to proceed powdered hot forging experiments at different rolling reduction of 15.8% ,18.1%and 20.9% .The pre-forging billet after powder-mixing ,pressing and sintering was forged to different relative density of 92% ,94% and 96% .The amount of wear of the mold before and after the tests was detected along the axial markers ,and the microscopic analysis of the mold after the tests was done by using scanning electron microscopy and phase analysis .The results showed that in the powder forging process ,with the increase of the density of forging ,the amount of wear of the mold also in-creased;the closer to the upper end of the axis the mold on the working section was ,the greater the amount of wear was;and the wear mechanism of the powder forging die was a homeostasis process with alternate oxidization and spalling .