Abstract:Preparation process and microstructure of CF/CNTs reinforcements and mechanical properties of their composites. Chemical vapor deposition (CVD) method was performed to grow carbon nanotubes (CNTs) on oxidized carbon fiber (CF). First, CF was oxidized by a simple and gentle way to increase the number of active groups and the optimal treatment time was determined. Then, effects of catalyst concentration and growth time on morphologies and loading amount of CNTs, the properties of CF/CNTs reinforcements, and the interlayer properties of CF/CNTs composites were explored. When the catalyst concentration and growth time were controlled at a reasonable level, CNTs can be uniformly grown on the CF surface. The interlaminar shear strength (ILSS) was characterized and the fracture surfaces of CF/CNTs composites were observed. The results demonstrated that when the catalyst precursor was kept at 0.05 mol/L and the growth time was controlled at 10 min, CNTs had the best strength effect and the ILSS increased by 30.25% compared to that of composites without CNTs. The fracture surface showed that CNTs can penetrate the matrix at the interface and enhance the interface through mechanical interlocking effect. The CNTs‐induced interphase allows the stress inside the composites to propagate continuously between resin and fibers, thereby heightening the load carrying capacity. Highlights A simple and gentle way was performed to activate CF without strength reduction. The influence mechanism of various parameters was revealed in detail. The mechanism of CNTs enhancing the interface was revealed.

Fabrication of ACF/CNT Composites by CVD Method

A new fabrication method of uniformly distributed TiO2/CNTs composite film by in-situ chemical vapordeposition

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Preparation of ACF/CNT Composite and Cr(VI) Adsorption Properties

Effect of pyrolysis temperature on properties of ACF/CNT composites

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Preparation of Three-Dimensional Carbon Microtube/Carbon Nanotube Composites and Their Application in Supercapacitor

High strength carbon nanofiber composite by in-situ synthesis for catalytic application

Study on C/C composites modified by in-situ vapor-grown carbon nanofibers

In situ growth of CNTs on carbon fiber by chemical vapor deposition

One‐step in‐situ growth of CNTs on oxidized carbon fiber: Effects of catalyst concentration and growth time on mechanical properties of carbon fiber

Fabrication and Characteristics of Carbon Nanofiber-Reinforced Carbon/Carbon Composites by Fast Catalytic Infiltration Processes

A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration

Fabrication of Nanocarbon Composites Using in Situ Chemical Vapor Deposition and Their Applications

Characterization of Carbon Nanofiber Composites Synthesized by Shaping Process

Fabrication and Characterization of Aligned Cnt/C Composites

Optimization of Electrical Intensity for Electrochemical Anodic Oxidation to Modify the Surface of Carbon Fibers and Preparation of Carbon Nanotubes/Carbon Fiber Multi-Scale Reinforcements

Removal of Rhodamine B from Aqueous Solution Using ACF/CNT Composites Prepared by Chemical Vapor Deposition

Mussel-tailored carbon fiber/carbon nanotubes interface for elevated interfacial properties of carbon fiber/epoxy composites

Non-destructive and controllable catalyst deposition of in situ growing carbon nanotubes onto the carbon fibre fabric

Preparation and Application of Multi-Walled Carbon Nanotubes and Metal Cobalt Nanoparticles Composite Carbon Fiber Electrodes