Abstract:Carbon nanofibers have been utilized increasingly for enhancing the mechanical properties of advanced polymer composites, which include high strength, stiffness, toughness, and through-thickness Properties. The incorporation of nano particles with a high aspect ratio and extremely large surface area into polymers improves their mechanical properties significantly. Although a number of efforts have been made to improve various properties by mixing nano particles directly into resin, however, it could lead to high viscosities which create problems during processing. In this particular study, an attempt has been made to enhance mechanical response of nano composites by using, state of the art, a different technique i.e spraying the Carbon Nano Fibers (CNF) on dry perform before infusion. The nano composite samples were prepared using a spraying methodology i.e dispersing the 1.0 weight percent CNF solution on carbon fabric, and evaporating the solvent such that only nano fibers remain on perform, followed by Vacuum assisted resin transfer molding (VARTM). Tensile, compression, flexural and short beam strength tests were performed to evaluate the effectiveness of CNF addition on the mechanical properties of carbon / epoxy composites. Results indicated, CNF addition offered simultaneous increase in all these mechanical properties in different percentages i.e 22–28 percent improvement in tensile strength, 7-11 percent in compressive strength, 14–19 percent in Flexural strength and 45-55 percent short beam strength with respect to the neat composite. The rise in their modulus has also been discussed in detail and part of this study. For in-depth analysis, Microscopic approaches were also carried out to investigate the fracture behavior and mechanism of material. Scanning electron microscopy of fractured surfaces revealed improved primary fiber–matrix adhesion and indications of CNF-induced matrix toughening.

Fabrication and Characteristics of Carbon Nanofiber-Reinforced Carbon/Carbon Composites by Fast Catalytic Infiltration Processes

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Enhanced Interfacial Properties of High-Modulus Carbon Fiber Composites Via Molecular Assembly on Fiber Surface

A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Rapid and Scalable Synthesis of Novel Carboxylated Aramid Nanofibers for Simultaneously Improving the Strength and Toughness of Carbon Fiber/epoxy Laminates

Construction of 3D nanostructures on carbon fiber surfaces by sizing for preparing high‐performance composites

Pyrolytic Synthesis of Conical Carbon Fibers with Carbon Nanotube Tips on Carbon Substrates

Mechanical Enhancement of Carbon Fiber/Epoxy Composites Based on Carbon Nano Fibers by Using Spraying Methodology

Large-Scale and Selective Synthesis of Carbon Nanofiber Bundles, Curved Carbon Nanofibers and Helical Carbon Nanofibers.

One‐step in‐situ growth of CNTs on oxidized carbon fiber: Effects of catalyst concentration and growth time on mechanical properties of carbon fiber

Hexagonal Crystalline Nanofillers Reinforced Composite Carbon Nanofibers with Optimized Crystal Structure and Improved Mechanical Properties

In-situ growth of scaly carbon nanotube by Cu@Ni core-shell catalyst on continuous carbon fiber surface for multiply tenoned composite interphase

Construction of cellulose nanofiber/carbon nanotube synergistic network on carbon fiber surface to enhance mechanical properties and thermal conductivity of composites

Epitaxial Grown Carbon Nanotubes Reinforced Pyrocarbon Matrix in C/C Composites with Improved Mechanical Properties

In situ growth of CNTs on carbon fiber by chemical vapor deposition

Interfacial modification of carbon fiber by carbon nanotube gas-phase dispersion

Effects of Thickness and Amount of Carbon Nanofiber Coated Carbon Fiber on Improving the Mechanical Properties of Nanocomposites

Preparation of magnetic solvent-free carbon nanotube/Fe 3 O 4 nanofluid sizing agent to enhance thermal conductivity and interfacial properties of carbon fiber composites

Carbon nanofibers based carbon-carbon composite fibers

Catalytic Growth of Very Long Composite Nanofibres Containing Co (or Fe, Ni), SrO and Trace Carbon