Abstract:High quality products are demanded due to increasingly fierce market competition. In this paper, the generation of surface wrinkle defect of welding wire steel ER70S-6 was studied by the combination of the experimental method and finite element simulation. Firstly, a thermal compression test was conducted on the Gleeble-3500 thermosimulator under different strain rates and temperatures and a strain dependent Arrhenius-type constitutive function was employed to fit the flow stress–strain curves obtained from the experiments. Then, the elastoplastic constitutive relationship was implemented using radial return mapping algorithm by means of the user subroutine VUMAT of Abaqus/Explicit. A new instability criterion was proposed to predict the possibility of the surface wrinkle defect during the multipass hot bar rolling process. In order to verify the reliability of the finite element model of the six-pass continuous rolling process, the simulated results were compared with experimental data. Finally, the effects of groove width and groove radius on the billet were investigated by the orthogonal test method, and the friction coefficient and rolling temperature. The results show that the groove width and groove radius are key factors to suppress the surface wrinkle defect. Decreasing the groove width can be beneficial for improving the surface quality and reducing the fillet radius. The optimized combination of the rolling process parameters was further applied in an industrial test and the surface quality of the billet was greatly improved.

Finite Element Analysis of Contact between Laying Head Pipe and High-Speed Wire Rod

Finite Element Simulation Of High-Speed Cutting Alloy Cast Iron

Simulation and Analysis of UOE Pipe Production Processing by Three-Dimensional Finite Element Method

The Finite Element Analysis on Can Coiler of Gilling Machine

Finite Element Simulation and Analysis of Aluminum Alloy Three-Dimensional Milling

Finite element synthesized analysis of the forming process of spiral welded pipe

Finite element analysis of the prestress wire-winding press

FEM Analysis and Process Parameter Optimizing of High Speed Wire Rod During Reducing and Sizing Multi-Pass Groove Rolling Process

Comparison between mechanical behaviors of wire ropes with distinct contact modes based on the finite element method

Prediction of Surface Wrinkle Defect of Welding Wire Steel ER70S-6 in Hot Bar Rolling Process Using Finite Element Method and Experiments

Applied analysis of pressure die technique on contact wire in high speed railway line

FEM Coupled Thermal-mechanical Simulation of Cold Spinning of Stainless Steel Pipe

Research of Temperature Field Simulation on Electrode Wire Wear for Wedm

Three-dimensional Finite Element Analysis for Flying Shearing of X100 Hot-rolled Steel Plate

Finite Element Analysis of Stainless Steel Under Coupled Deformation and Friction Condition

Finite Element Simulation and Quality Control of Hydropiercing Process

Finite Element Analysis of Stress and Strain Field in Thin-wall Taper Workpiece During Spinning Forming

3D Rigid–plastic FEM Numerical Simulation on Tube Spinning

Pre-stress Test for Steel Wire Wound Moving Beam of Heavy Forging Press Based on Finite Element Method

Numerical Analysis of Contact Property for W-Ni-Fe Alloy-steel Hot Continuous Rolling

Temperature Field Simulation of Wire Electrode in High-Speed and Medium-Speed Wedm under Moving Heat Source