Abstract:A coupled thermo-metallo-mechanical model is proposed to analyse the temperature, stress and microstructure fields in multi-pass welding of P92 pipes. An axisymmetric model is adopted to increase the efficiency of the simulation. To preserve the temperature field from a three-dimensional (3D) analysis, a procedure is proposed to convert the 3D result into a two-dimensional (2D) form, which is compared to temperature fields created by other 2D heat transfer analyses. A metallurgical algorithm, which does not need the calibration with metallurgical experiments, is implemented in the finite element (FE) analysis to predict spatial distributions of product phases during multi-pass welding. Comparison between the predictions and the metallurgical graphs is made to verify the effectiveness of the metallurgical analysis after twenty thermal cycles. Hardness test is also employed to characterize the microstructure and to validate the metallurgical predictions. Five temperature fields, one created from the newly proposed approach and four from existent ones, are used as external loads to conduct the mechanical analysis. The volumetric change due to the phase transformation is considered as an extra volumetric strain, which is implemented by user subroutine. The stress distributions predicted using the five temperature fields are plotted together with the 3D stress result to examine the effectiveness of the developed procedure. The stress at the external surface of the pipe is measured by the X-ray diffraction technique, and is further compared to the stress predictions. The advantage of the model is demonstrated by comparing the computational time consumed in the mechanical analysis.

FEM Coupled Thermal-mechanical Simulation of Cold Spinning of Stainless Steel Pipe

Finite Element Analysis of Spindle Thermal Character Based on Thermal Contact Resistance

3D Rigid–plastic FEM Numerical Simulation on Tube Spinning

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Research on Tensible Properties of Cold Spinning Stainless Steel Pipe

FEM Numerical Simulation of Spinning Processing for TC4 Alloy

Coupled Thermo-mechanical Model for Metal Orthogonal Cutting Process and Finite Element Simulation

FEM numerical simulation of spinning processing for thin TC4 alloy workpiece with curvilinear shape

Finite Element Analysis of Modeling Residual Stress Distribution in All-position Duplex Stainless Steel Welded Pipe

Study on the spinning process of thin-walled aluminum alloy vessel head

A Study of 3D Finite Element Modeling Method for Stagger Spinning of Thin-Walled Tube

Numerical Simulation Research on A New Spinning Process: Double-Roller Clamping Spinning Process

Finite element synthesized analysis of the forming process of spiral welded pipe

Modeling of cold pilgering of stainless-steel tubes

The finite element Analysis of the thermal stress of the stainless steel lined composite steel pipe prepared by centrifugal-SHS

FEM Simulation of Tube Spinning with Non-Symmetric Distribution of Three Rollers

Three-dimensional finite element simulation of residual stresses in circumferential welds of steel pipe including pipe diameter effects

Application of Modeling and Simulation of Thermal Stress in Solidification Process of a Heavy Steel Casting

Analysis of Backward Ball Spinning of Thin-Walled Tube Part with Longitudinal Inner Ribs Based on FEM

Numerical Simulation of Solidification of Thick-Wall Stainless Steel Pipe in Horizontal Centrifugal Casting Process

Finite Element Analysis of Stress and Strain Field in Thin-wall Taper Workpiece During Spinning Forming