Abstract:Ultrahigh‐speed casting is the most remarkable feature of billet high‐efficiency continuous casting. The transient fluid flow, heat transfer, and solidification behavior under different casting speeds, submerged entry nozzle (SEN) parameters, and mold electromagnetic stirring (M‐EMS) are investigated using a 3D transient mathematical model. The results show that a typical roll flow pattern is generated for all casting speeds, while a third small recirculation zone developed near the solidified shell at the casting speed of 6.0 m min−1. When the casting speed increases, the impact depth of the molten steel increases from 0.748 to 0.844 m, the velocity and level fluctuation at the steel/slag interface increases, the high‐temperature zone moves downward, and the shell thickness is reduced from 16.2 to 11.1 mm. As the SEN inner diameter and immersion depth increases, the impact depth increases, the velocity and level fluctuation at the steel/slag interface decreases, and the shell thickness at the mold exit is ≈11.0 mm. When the SEN immersion depth and inner diameter are 120 and 40 mm, respectively, the flow and temperature fields in the mold are the most appropriate. In addition, the M‐EMS have a great effect on the fluid flow and heat transfer behavior. A coupled 3D numerical model is established to study the fluid flow, heat transfer, and solidification in a billet continuous casting mold under different casting speeds, submerged entry nozzle (SEN) inner diameters, SEN immersion depths, and mold electromagnetic stirring (M‐EMS). The velocity field, temperature field, steel/slag level fluctuation, and the growth of solidified shell are analyzed comparatively.

Numerical Simulation of Solidification of Thick-Wall Stainless Steel Pipe in Horizontal Centrifugal Casting Process

Numerical simulation analysis of thermal stress fields during solidification of steel casting

Numerical Simulation of Solidification and Heat Transfer in Continuously Cast Bloom

Numerical simulation of coupled fluid flow and solidification in a curved round bloom continuous caster with a combined rotary electromagnetic stirring

Numerical Simulation of Fluid Flow and Solidification in Continuous Slab Casting Mould Based on Inverse Heat Transfer Calculation

Application of Modeling and Simulation of Thermal Stress in Solidification Process of a Heavy Steel Casting

A Study on the Numerical Simulation of Thermal Stress During the Solidification of Shaped Castings

Numerical simulation of macrosegregation during the solidification of steel casting

Numerical Simulation on Multiple Physical Fields Behaviors in Billet Continuous Casting with Different Stirrer Positions

Numerical Simulation of the Flow Field in an Ultrahigh-Speed Continuous Casting Billet Mold

Numerical Simulation of Flow, Heat, Solidification, Solute Transfer and Electromagnetic Field for Vertical Mold and Curved Mold of Billet

Numerical Simulation and Experiments Research on Secondary Cooling Process of Thick Slab Continuous Casting

Three-dimensional Simulation of Solidification Process in Large Steel Ingot

Numerical Simulation of the Fluid Flow, Heat Transfer, and Solidification in Ultrahigh Speed Continuous Casting Billet Mold

Investigation of Solidification, Heat Transfer and Fluid Flow in Continuous Casting of Steel Using an Advanced Modeling Approach

Coupling Simulation and Mechanism Analysis of Grain Formation and Growth in Horizontal Centrifugal Casting

Numerical Simulation of Solidification Process on Single Crystal Ni-Based Superalloy Investment Castings

A coupled model on fluid flow, heat transfer and solidification in continuous casting mold

Numerical Simulation of Solidification Process in an SCR Wheel and Belt Continuous Caster

Progress in numerical simulation of solidification process of shaped casting

Numerical Simulation of Heat Transfer Phenomenon in Steel Making Ladle