Abstract:As an essential component of ammunition, pyrotechnics can control ignition with high reliability. However, due to limits of fabrication technology, traditional pyrotechnics are bulky. To achieve both functionality and miniaturization, MEMS pyrotechnics integrate initiator, safety-and-arming (S&A) device and lead charge and keep all components within a small size. MEMS S&A devices, as the core component to ensure system safety, are difficult to achieve active and rapid response to control signals with high safety and reliability. In order to overcome the difficulty, we propose the design and characterization of a MEMS pyrotechnic with a double-layer barrier S&A device. The MEMS pyrotechnic is a high-integrated device with an overall size of 13.4 × 8.5 × 5.2 mm3. The initiator is a NiCr bridge foil covered with an Al/CuO energetic film, which can generate flame when ignited by an excitation voltage. To match the flame energy, lead styphnate is chosen in this study as the lead charge. The S&A device contains four semi-circular barriers, which are directly driven by V-shape electro-thermal actuators to gain active control of the pyrotechnics' ignition condition with rapid response. To improve the system's reliability, the four barriers are axisymmetrically placed in two layers, two barriers for each layer, to constitute a double-layer structure with a thickness of 100 μm. The ignition test results show that the S&A device can prevent the initiator from detonating the lead charge in safety condition. In arming condition, the lead charge will be detonated.

A MEMS Safe and Arm Device for Spin Stabilized Ammunition Fuze

Simulation and Test of a MEMS Arming Device for a Fuze

Test and Improvement of a Fuze MEMS Setback Arming Device Based on the EDM Process

Research on Multiphysics-Driven MEMS Safety and Arming Devices

Design of a Double-Layer Electrothermal MEMS Safety and Arming Device with a Bistable Mechanism

Research on a MEMS pyrotechnic with a double-layer barrier safety and arming device

Design of an Intelligent MEMS Safety and Arming Device with a Condition Feedback Function

Shape Memory Alloy Safety Device with Zr-BaCrO_4 Heat Paper

Study on the Elastic Coefficient of MEMS Planar Microspring

Design and Performance of a Micro-Scale Detonation Train with a Built-in Pyrotechnic MEMS-based Safety and Arming Device

Research on the Application of Microcast Electromagnetic Coil in an Si MEMS Bistable Recoverable Safety and Arming Device

Design and Evaluation of a Novel Self-Locking Quick Release Mechanism Featured by Heavy Load, Fast Response, and High Security

Research on Miniaturization of Laser Proximity Fuze

Micromachined integrated self-adaptive nonlinear stops for mechanical shock protection of MEMS

A Novel Shock Protection Method Based On Mems Compliant Latching Stopper

On Chip Electrostatic Discharge Protection for MEMS Gas Sensor System

A thermal actuator design for a safe and arming mems interrupter

Design of an H-shaped Linear Piezoelectric Motor for Safety and Arming Device

Fabrication of Micro-Ignition Sequence Based on Electronics Safety and Arming Unit

Structural Design of MEMS Acceleration Sensor Based on PZT Plate Capacitance Detection

Anti-interference Methods for Small-sized Laser Proximity Fuse