Abstract:As an essential component of ammunition, pyrotechnics can control ignition with high reliability. However, due to limits of fabrication technology, traditional pyrotechnics are bulky. To achieve both functionality and miniaturization, MEMS pyrotechnics integrate initiator, safety-and-arming (S&A) device and lead charge and keep all components within a small size. MEMS S&A devices, as the core component to ensure system safety, are difficult to achieve active and rapid response to control signals with high safety and reliability. In order to overcome the difficulty, we propose the design and characterization of a MEMS pyrotechnic with a double-layer barrier S&A device. The MEMS pyrotechnic is a high-integrated device with an overall size of 13.4 × 8.5 × 5.2 mm3. The initiator is a NiCr bridge foil covered with an Al/CuO energetic film, which can generate flame when ignited by an excitation voltage. To match the flame energy, lead styphnate is chosen in this study as the lead charge. The S&A device contains four semi-circular barriers, which are directly driven by V-shape electro-thermal actuators to gain active control of the pyrotechnics' ignition condition with rapid response. To improve the system's reliability, the four barriers are axisymmetrically placed in two layers, two barriers for each layer, to constitute a double-layer structure with a thickness of 100 μm. The ignition test results show that the S&A device can prevent the initiator from detonating the lead charge in safety condition. In arming condition, the lead charge will be detonated.

Simulation and Test of a MEMS Arming Device for a Fuze

Test and Improvement of a Fuze MEMS Setback Arming Device Based on the EDM Process

Research on Multiphysics-Driven MEMS Safety and Arming Devices

Design and Performance of a Micro-Scale Detonation Train with a Built-in Pyrotechnic MEMS-based Safety and Arming Device

Shape Memory Alloy Safety Device with Zr-BaCrO_4 Heat Paper

Research on a MEMS pyrotechnic with a double-layer barrier safety and arming device

Study on the Elastic Coefficient of MEMS Planar Microspring

Design of a Double-Layer Electrothermal MEMS Safety and Arming Device with a Bistable Mechanism

Design of an Intelligent MEMS Safety and Arming Device with a Condition Feedback Function

Structural Design of MEMS Acceleration Sensor Based on PZT Plate Capacitance Detection

Meso-Simulation and Experimental Research on the Mechanical Behavior of an Energetic Explosive

Design and Evaluation of a Novel Self-Locking Quick Release Mechanism Featured by Heavy Load, Fast Response, and High Security

Launch Dynamics Analysis of a Grenade Machine Gun with High Muzzle Velocity Based on the Soft Recoil Technology

Research on the Application of Microcast Electromagnetic Coil in an Si MEMS Bistable Recoverable Safety and Arming Device

Modeling and Simulation of A Silicon Integration Tri-Axial Piezoresistive MEMS Accelerometer Chip Used for High Impact Test

A novel multi-direction high shock reliability test on MEMS devices

Study of failure mode and failure load of a civil aircraft pylon double-layer fuse pin

STUDY ON A MEMS FATIGUE TESTING DEVICE BASED ON THE RESONANCE PRINCIPLE

Design and Analysis of a New Multi-Part Composite Frangible Cover

Technique and Structure for Testing Bonding Intension in Micron Scale

Strap-down microelectromechanical (MEMS) sensors for high-g munition applications