Abstract:TiO2-diatomite photocatalysts were prepared by sol-gel process with various pre-modified diatomite. In order to obtain diatomite with different surface characteristics, two modification approaches including calcination and phosphoric acid treatment on the micro-structure of diatomite are introduced. The photocatalysts were characterized by XRD, XPS, nitrogen adsorption-desorption isotherms and micromorphology analysis. The results indicate that, compared with pure TiO2, the anatase-to-rutile phase transition temperature of TiO2 loaded on diatomite carrier is significantly increased to nearly 900 degrees C, depending on the different pretreatment method of diatomite. The photocatalytic activities of different samples were evaluated by their degradation rate of methyl orange ( MO) dye under UV and visible-light irradiation. The samples prepared by phosphoric acid pretreatment method exhibit the highest photocatalytic activity. After 90 min of UV irradiation, about 90% of MO is decomposed by the best effective photocatalyst. And after 8 h visible-light irradiation, nearly 60% of MO is decomposed by the same sample. Further mechanism investigation reveals that the H3PO4 pretreatment process can obviously change the surface features of diatomite carrier, cause the formation of Si-O-Ti bond, increase the binding strength between TiO2 and diatomite, restrain crystal growth of loaded TiO2, and thus form thermal-stable meso-porous structure at the granular spaces. It helps to build micro-, meso- and macro-porous hierarchical porous structure in TiO2-diatomite, and improves the charge and mass transfer efficiency during catalyzing process, resulting in the significantly increased photocatalytic activity of TiO2-diatomite pretreated by phosphoric acid. (C) 2014 Elsevier B. V. All rights reserved.

Adsorption-Desorption Performances of Humidity Controlling Diatomite-Based Ceramics

Humidity-control Performance of Diatomite Modified by Calcium Chloride

The Effects of Mineral Composition and Sintering Temperature on Synthetic Mullite

Preparation of Diatomite-Based Porous Ceramics Containing Carbon and Its Adsorption to Methylene Blue

Low-temperature Preparation of Humidity Self-Regulating Porous Ceramics with High Strength Performance

Synthesis and Humidity Control Performances of Natural Opoka Based Porous Calcium Silicate Hydrate

Gypsum-based Silica Gel Humidity-controlling Composite Materials: Preparation, Characterization, and Performance

Preparation and Characterization of Composite Scallop Shell Powder-Based and Diatomite-Based Hygroscopic Coating Materials with Metal-Organic Framework for Indoor Humidity Regulation

Development and adsorption properties of diatomite-LiCl composite desiccant

Purification and Carbonation for High Loss and Low-Grade Diatomite in Inner Mongolia

Preparation and Performance of Inorganic Hydrated Salt-Based Composite Materials for Temperature and Humidity Regulation

The Adsorption of Dyes from Aqueous Solution Using Diatomite

Comparison study between a series of new type functional diatomite on methane adsorption performance

Effect of Diatomite Additive on the Mechanical and Dielectric Properties of Porous SiO2-Si3N4 Composite Ceramics

Fabrication and properties of diatomite ceramics with hierarchical pores based on direct stereolithography

Interface Actions Between TiO2 and Porous Diatomite on the Structure and Photocatalytic Activity of TiO2-diatomite

Carbonization Treatment and Adsorption Properties of Diatomite with Organics

Microstructure and Properties of In-Situ Prepared Cellulosic Biomass Carbon Based Diatomite Composite

Study on Preparation and Humidity-Control Capabilities of Vermiculite/Poly(sodium Acrylate-acrylamide) Humidity Controlling Composite

Development of new water-borne humidity controlling coating

Sintering Kinetics of Porous Ceramics from Natural Diatomite