Abstract:The application of quaternary ammonium-based moisture-swing adsorbent provides an effective strategy for direct air capture (DAC) with low energy consumption of regeneration. This study optimized a fabrication method of shaped adsorbents and a hydrophobicity regulation method by doping polyvinylidene difluoride (PVDF). Characterization of the shaped adsorbents showed a desirable surface area and pore structure. Experiments of CO2 adsorption revealed that the adsorbents exhibited excellent CO2 adsorption capacity (∼0.90 mmol/g) in relative humidity (RH) range of 20 ∼ 85% was enhanced by 160% of that before doping. Meanwhile, a high CO2 adsorption rate (with a half-time of 3.6 ∼ 3.82 min) at 84.7% RH was displayed. The optimal doping ratio of PVDF was found to be 25% (QAR-25% PVDF). It can effectively release CO2 with 100% RH, and heat assistance (<60 °C) can be considered for optimal results. QAR-25% PVDF exhibited a cyclic capacity of 0.90 mmol/g after ten cycles, demonstrating its stability and reusability. DFT and microscopic characterization revealed the key role of C-F bond in promoting the hydrophobicity of adsorbents. Meanwhile, the isotherm of H2O/CO2 adsorption illustrated that doping PVDF could effectively reduce the humidity sensitivity of shaped adsorbents and improve CO2 adsorption rate significantly. Among DAC adsorbents reported previously, the adsorbents developed in this study showed higher functional group efficiency (η QA = 0.89) at high humidity conditions. The fabrication method of shaped adsorbent provides a viable strategy for its large-scale deployment. Doping hydrophobic carriers into the adsorbent material is a simple yet effective way to reduce its humidity sensitivity, enabling it to better adapt to complex environmental conditions.

Development of new water-borne humidity controlling coating

The Coating Properties of Waterborne UV-Curable Polyurethane Acrylate and Influencing Factors

Study on Preparation and Humidity-Control Capabilities of Vermiculite/Poly(sodium Acrylate-acrylamide) Humidity Controlling Composite

Synthesis and Humidity Control Performances of Natural Opoka Based Porous Calcium Silicate Hydrate

Preparation of Acrylate-Based Copolymer Emulsion and Its Humidity Controlling Mechanism in Interior Wall Coatings

Multi-plateau water adsorption of pyrene-based covalent organic frameworks for potential humidity control

Humidity-control Performance of Diatomite Modified by Calcium Chloride

Gypsum-based Silica Gel Humidity-controlling Composite Materials: Preparation, Characterization, and Performance

Preparation of Porous Potato Starch and Its Application in Moisture Control Coatings

Engineering surface functional groups on mesoporous silica: towards a humidity-resistant hydrophobic adsorbent

Preparation of high specific surface area activated carbon fiber by high-temperature vacuum activation and its superior water vapor adsorption for air humidity control

Optimization Preparation and Durability Analysis of Abrasion Resistant-Superhydrophobic Cementitious Material

Study on superabsorbent composite. XI. Effect of thermal treatment and acid activation of attapulgite on water absorbency of poly(acrylic acid)/attapulgite superabsorbent composite

Preparation of reformed MgO filler with high humidity resistance by a hydrothermal coating technique.

Boron-Based Mildew Preventive and Ultraviolet Absorbent Modification of Waterborne Polyurethane Coatings on Laminated Bamboo

Humidity sensitivity reducing of moisture swing adsorbents by hydrophobic carrier doping for CO2 direct air capture

Functionalization of Mesoporous Al-MCM-41 for Indoor Humidity Control as Building Humidity Conditioning Material

Ecofriendly fabrication of superhydrophobic coating with high chemical/mechanical durability and enhanced heat resistance by 1D/2D hybridization strategy

The Waterborne Superamphiphobic Coatings with Antifouling, High Temperature Resistance, and Corrosion Resistance

Hydrophilic Coating With Anti-fogging and Anti-icing Properties

A breathable and environmentally friendly superhydrophobic coating for anti-condensation applications