Abstract:The development of high-performance insulation materials that facilitate the reduction in building energy consumption is of paramount significance. In this study, magnesium-aluminum-layered hydroxide (LDH) was prepared by the classical hydrothermal reaction. By implementing methyl trimethoxy siloxane (MTS), two different MTS-functionalized LDHs were prepared via a one-step in situ hydrothermal synthesis method and a two-step method. Furthermore, using techniques, such as X-ray diffraction, infrared spectroscopy, particle size analysis, and scanning electron microscopy, we evaluated and analyzed the composition, structure, and morphology of the various LDH samples. These LDHs were then employed as inorganic fillers in waterborne coatings, and their thermal-insulation capabilities were tested and compared. It was found that MTS-modified LDH via a one-step in situ hydrothermal synthesis method (M-LDH-2) exhibited the best thermal insulating properties by displaying a thermal-insulation-temperature difference (ΔT) of 25 °C compared with the blank panel. In contrast, the panels coated with unmodified LDH and the MTS-modified LDH via the two-step method exhibited thermal-insulation-temperature difference values of 13.5 °C and 9.5 °C, respectively. Our investigation involved a comprehensive characterization of LDH materials and coating films, unveiling the underlying mechanism of thermal insulation and establishing the correlation between LDH structure and the corresponding insulation performance of the coating. Our findings reveal that the particle size and distribution of LDHs are critical factors in dictating their thermal-insulation capabilities in the coatings. Specifically, we observed that the MTS-modified LDH, prepared via a one-step in situ hydrothermal approach, possessed a larger particle size and wider particle size distribution, resulting in superior thermal-insulation effectiveness. In contrast, the MTS-modified LDH via the two-step method exhibited a smaller particle size and narrow particle size distribution, causing a moderate thermal-insulation effect. This study has significant implications for opening up the potential for LDH-based thermal-insulation coatings. We believe the findings can promote the development of new products and help upgrade industries, while contributing to local economic growth.

Preparation of reformed MgO filler with high humidity resistance by a hydrothermal coating technique.

Fabrication of Y2O3-doped MgO Refractory Raw Materials Based on Magnesium Hydroxide from Salt-Lake Brine

Improvement of humidity resistance of magnesium powder using dry particle coating

Porous MgO-based ceramics synthesized by the volume expansion effect: Designing and performance

Methyl-Trimethoxy-Siloxane-Modified Mg-Al-Layered Hydroxide Filler for Thermal-Insulation Coatings

Facile synthesis of highly moisture-resistant Mg-MOF-74 by coating hexagonal boron nitride (h-BN)

Preparation of highly active MgO by carbonate hydrogenation and its application in separation of cobalt and nickel

In Situ Preparation of Mg-Al-Co Layered Double Hydroxides on Microarc Oxidation Ceramic Coating of LA103Z Magnesium-Lithium Alloy for Enhanced Corrosion Resistance

Mg-MOF-74/MgF2 Composite Coating for Improving the Properties of Magnesium Alloy Implants: Hydrophilicity and Corrosion Resistance

Advanced moisture-resistant Mg@PDA@PTFE: Proportional optimization and energy release characterization

Preparation of highly-dispersed Mg(OH)2 powders and influence factors

Preparation and anti-corrosion Properties of SiO2@MWCNTs@PFOTES Superhydrophobic Coatings on Magnesium Alloy

Heat Treatment-Induced Microstructure and Property Evolution of Mg/Al Intermetallic Compound Coatings Prepared by Al Electrodeposition on Mg Alloy from Molten Salt Electrolytes

Improved corrosion resistance of ZrO 2 /MgO coating for magnesium alloys by manipulating the pore structure

Development of superhydrophobic protective coatings through surface functionalization of porous MgO with transition metal salts of palmitic acid

Enhancing Hydrophobicity Via Core–shell Metal Organic Frameworks for High-Humidity Flue Gas CO2 Capture

Preparation and properties of porous MgO based ceramics from magnesite tailings and fused magnesia

A facile and general coating approach to moisture/water-resistant metal-organic frameworks with intact porosity.

Preparation and characterization of lamellar-like Mg(OH)2 nanostructures via natural oxidation of Mg metal in formamide/water mixture

Influence of synthesis condition on magnesium hydroxide properties by two-step reaction on pilot scale

Synthesis of Porous MgF2 Coating by a Sol–Gel Method Accompanied by Phase Separation