Abstract:The current study aims to evaluate the performance of the ultrasonic vibration-assisted milling (USVAM) process when machining two different materials with high deviations in mechanical properties, specifically 7075 aluminium alloy and Ti-6Al-4V titanium alloy. Additionally, this study seeks to develop an AI-based model to predict the process performance based on experimental data for the different workpiece characteristics. In this regard, an ultrasonic vibratory setup was designed to provide vibration oscillations at 28 kHz frequency and 8 μm amplitude in the cutting feed direction for the two characterised materials of 7075 aluminium alloy (150 BHN) and Ti-6Al-4V titanium alloy (350 BHN) workpieces. A series of slotting experiments were conducted using both conventional milling (CM) and USVAM techniques. The axial cutting force and machined slot surface roughness were evaluated for each method. Subsequently, Support Vector Regression (SVR) and artificial neural network (ANN) models were built, tested and compared. AI-based models were developed to analyse the experimental results and predict the process performance for both workpieces. The experiments demonstrated a significant reduction in cutting force by up to 30% and an improvement in surface roughness by approximately four times when using USVAM compared to CM for both materials. Validated by the experimental findings, the ANN model accurately and better predicted the performance metrics with RMSE = 0.11 μm and 0.12 N for Al surface roughness and cutting force. Regarding Ti, surface roughness and cutting force were predicted with RMSE of 0.12 μm and 0.14 N, respectively. The results indicate that USVAM significantly enhances milling performance in terms of a reduced cutting force and improved surface roughness for both 7075 aluminium alloy and Ti-6Al-4V titanium alloy. The ANN model proved to be an effective tool for predicting the outcomes of the USVAM process, offering valuable insights for optimising milling operations across different materials.

A Processing Predictive Model of Ultrasonic Vibration Grinding Assisted Electric Discharge Machining Based on Support Vector Machines

An Intelligent Prediction of Surface Roughness on Precision Grinding

Support Vector Machines-Based Method for Machining Error Prediction Modeling

Research on the System Matching Model in Ultrasonic Vibration-Assisted Grinding

Study on Grinding Force Model in Ultrasonic Vibration Assisted Grinding for Ductile Materials

Online Roundness Prediction of Grinding Workpiece Based on Vibration Signals and Support Vector Machine

Ensemble learning with support vector machines algorithm for surface roughness prediction in longitudinal vibratory ultrasound-assisted grinding

Establishment of the Prediction Model for Ferrite Surface Roughness in Ultrasonic Vibration Grinding

Theoretical Modeling and Surface Roughness Prediction of Microtextured Surfaces in Ultrasonic Vibration-Assisted Milling

Prediction of Machine Tool Condition Using Support Vector Machine

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Research on Optimum Processing Parameter of EDM Based on Support Vector Machine

Research on the prediction model of Micro-milling surface roughness

Development of a probabilistic algorithm of surface residual materials on Si3N4 ceramics under longitudinal torsional ultrasonic grinding

Surface Topography and Roughness Prediction of Axial Ultrasonic Assisted Facing Grinding Metal

Research On Optical Surface Quality Online Monitoring Based On Support Vector Machine

Model for Surface Topography Prediction in the Ultra-Precision Grinding of Silicon Wafers Considering Volumetric Errors

AI-Based Prediction of Ultrasonic Vibration-Assisted Milling Performance

Prediction of undeformed chip thickness distribution and surface roughness in ultrasonic vibration grinding of inner hole of bearings

Integrated Optimization Model in Wire Electric Discharge Machining Using Gaussian Process Regression and Wolf Pack Algorithm Approach While Machining SiCp/Al Composite

Extreme Learning Machine Oriented Surface Roughness Prediction at Continuous Cutting Positions Based on Monitored Acceleration