Abstract:Silicon carbide (SiC) ceramic material has become the most promising third-generation semiconductor material for its excellent mechanical properties at room temperature and high temperature. However, SiC ceramic machining has serious tool wear, low machining efficiency, poor machining quality and other disadvantages due to its high hardness and high wear resistance, which limits the promotion and application of such materials. In this paper, comparison experiments of longitudinal torsional ultrasonic vibration grinding (LTUVG) and common grinding (CG) of SiC ceramics were conducted, and the longitudinal torsional ultrasonic vibration grinding SiC ceramics cutting force model was developed. In addition, the effects of ultrasonic machining parameters on cutting forces, machining quality and subsurface cracking were investigated, and the main factors and optimal parameters affecting the cutting force improvement rate were obtained by orthogonal tests. The results showed that the maximum improvement of cutting force, surface roughness and subsurface crack fracture depth by longitudinal torsional ultrasonic vibrations were 82.59%, 22.78% and 30.75%, respectively. A longitudinal torsional ultrasonic vibrations cutting force prediction model containing the parameters of tool, material properties and ultrasound was established by the removal characteristics of SiC ceramic material, ultrasonic grinding principle and brittle fracture theory. And the predicted results were in good agreement with the experimental results, and the maximum error was less than 15%. The optimum process parameters for cutting force reduction were a spindle speed of 22,000 rpm, a feed rate of 600 mm/min and a depth of cut of 0.011 mm.

Development of a probabilistic algorithm of surface residual materials on Si3N4 ceramics under longitudinal torsional ultrasonic grinding

An Intelligent Prediction of Surface Roughness on Precision Grinding

Studies on the Surface Quality of the Unsteady-State Grinding Technique

Prediction of undeformed chip thickness distribution and surface roughness in ultrasonic vibration grinding of inner hole of bearings

Surface prediction in laser-assisted grinding process considering temperature-dependent mechanical properties of zirconia ceramic

Prediction and Optimization of Surface Roughness for Laser-Assisted Machining SiC Ceramics Based on Improved Support Vector Regression

Simulation and Experiment of Surface Roughness in Ultrasonic Vibration Mill-Grinding of Advanced Ceramics

Investigation of Surface Topography Formation Mechanism Based on Abrasive-Workpiece Contact Rate Model in Tangential Ultrasonic Vibration-Assisted CBN Grinding of ZrO2 Ceramics

Research on Predicting Model of Surface Roughness in Small-Scale Grinding of Brittle Materials Considering Grinding Tool Topography

Material removal mechanism and grinding force modelling of ultrasonic vibration assisted grinding for SiC ceramics

Longitudinal–Torsional Ultrasonic Grinding of GCr15: Development of Longitudinal–Torsional Ultrasonic System and Prediction of Surface Topography

Study on a probabilistic algorithm for the forming and 3D characterization of special-shaped surfaces under profile grinding

Precision Grinding Technology of Silicon Carbide (SiC) Ceramics by Longitudinal Torsional Ultrasonic Vibrations

Modelling and Analysis of Generation Mechanism of Micro-Surface Topography During Elliptical Ultrasonic Assisted Grinding

Theoretical and Experimental Investigations of Surface Generation Induced by Ultrasonic Assisted Grinding

Kinematics and Simulation Analysis of Longitudinal-Torsional Ultrasonic Assisted Grinding of Zirconia Ceramics

Modeling and experimental study of surface generation in ultrasonic vibration-assisted grinding of Ti-6Al-4V micro-channels

Research on Predicting Model of Surface Roughness for Ground Engineering Ceramics

Generation Mechanism Modeling of Surface Topography in Tangential Ultrasonic Vibration-Assisted Grinding with Green Silicon Carbide Abrasive Wheel

The material removal and surface generation mechanism in ultra-precision grinding of silicon wafers

Study on the removal mechanism of Si3N4 ceramic material in rotary ultrasonic grinding based on multi-abrasive coupling simulation