Abstract:Journal of Composite Materials, Ahead of Print. In this paper, the optimal design of I- and T-shaped stringer's 90° plies is investigated to improve the performance of composite stiffened panel's strength and curing deformation. A theoretical method is deduced to build the constitutive equations of curing and buckling, which indicates that the stringer's 90° plies play an important role in the curing deformation of the structure. The finite element method (FEM) is adopted to simulate the curing and instability path of the structure, and the simulation model's accuracy is verified by strain assurance criterion. In addition, the experimental analysis is performed by a series of I- and T-shaped specimens with different stringer's 90° plies. The good agreement between the results of theoretical method, FEM, and experiment confirms the reliability and feasibility of the analytical methods proposed in this paper. Furthermore, the optimal stringer's 90° plies ratio is explored. The curves fitted in this investigation reveal that in the stages of (I) and (II), the percentage of stringer's 90° plies θ has significant effect on curing deformation, while bearing capacity has little change. The reasonable range of θ is 5%∼20%, in which the bearing capacity and curing deformation reach the optimal solution. Therefore, the structures that are not sensitive to curing deformation are recommend to remove the stringer's 90° plies, which is benefit to reduce weight, optimize structural design and improve process quality. The results provide a reference to design I-, T-, L- and C- shaped composite panel.

The Influence Analysis of Stiffness on Stringer Layout and Dimension of Full Composite Wing

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

STIFFENER STIFFNESS AND ELASTIC BUCKLING STRESS OF STEEL PLATE SHEAR WALL

STUDY FOR IN-PLANE ULTIMATE STRENGTH OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORTS

THEORETICAL ANALYSIS METHOD FOR ARCH STRING STRUCTURE WITH ELASTIC SUPPORT IN THE HORIZONTAL DIRECTION

Reduced Stiffness of Composite Beams Considering Slip and Shear Deformation of Steel

Aeroelastic tailoring of stiffened cantilever plate using composites and structural layouts: A parametric study

FE Analysis of Stress Concentrations in Composite Plates with Multiple Holes for Zigzag Multi-Fastened Joints

Numerical simulation and experiment validation of variable stiffness composite laminates with open holes under unidirectional tension

Influence of Relative Thickness on Static and Dynamic Stall Characteristics and Prediction of Airfoils

The Effect of Torsional and Bending Stiffness on the Aerodynamic Performance of Flapping Wing

Study on Structure Design and Manufacture of High Load-weight Ratio Composite Wing Model

Simplified Method for the Stiffness Computation of T-shaped Integrated Composite Structure

Stiffness Prediction and Analysis of Composite Leaf Springs

Influence of Substructure Stiffness on Static Performance of Arch-beam Composite Bridge

The Modeling Method for Vibration Characteristics Analysis of Composite-Laminated Rotationally Stiffened Plate

Stiffness enhancement methods for thin-walled aircraft structures: A review

On the Effects of Fiber Length and Spatial Distribution on the Stiffness of Short-Fiber Reinforced Composites

An efficient stiffness analysis model based on shear deformation theory for flexible skin shear variable-sweep wing

Experimental and numerical investigation of stringer's 90° plies optimization of composite material stiffened panels