Abstract:The purposes of this paper are sixfold. First, any micromechanics model for predicting elastic property (stiffness) of a composite is applicable to a reasonable prediction of a composite strength, provided that the homogenized internal stresses in the matrix are converted into true values. The conversion for all of the stress components free of biaxially transverse loads is presented in the paper. Second, the predictability of 12 well-known micromechanics models for stiffness and strength of a unidirectional composite is assessed against the measured data of all of the nine unidirectional composites used in three world-wide failure exercises. An accuracy ranking is made accordingly. Third, it is demonstrated that the smallest fiber volume in a representative volume element for a finite element approach plays a more dominant role than other issues such as a random fiber array to achieve the highest simulation accuracy. This feature has been largely ignored in the current literature. Fourth, a consistency of a micromechanics model in calculating the internal stresses in the fiber and matrix of the composite is an issue that should be taken into account. Among the 12 models considered, only Bridging Model is consistent. A non-consistency implies that a full three-dimensional approach should be used to predict an effective property of the composite even though it is subjected to a uniaxial load. Fifth, an effective method to detect an interface debonding between the fiber and matrix subjected to an arbitrary load is presented in the paper. Only a transverse tensile strength of the composite, in addition to the original fiber and matrix properties, is needed. Whereas essentially any load can cause the interface to debond earlier before a composite failure, only a transverse tensile load carrying capacity of the composite is influenced significantly by the debonding. Specifically, an interface debonding has insignificant effect on a shear strength of the composite. Sixth, a fiber misalignment-induced kink band failure is analyzed by virtue of the original fiber and matrix properties, and a longitudinal compressive strength is predicted micromechanically.

On the Effects of Fiber Length and Spatial Distribution on the Stiffness of Short-Fiber Reinforced Composites

Effect of fiber arrangement on mechanical properties of short fiber reinforced composites

Investigation of the effect of spirally stacked fiber reinforcement on the torsional behavior of a polymer composite rod by AE analysis

The Effect of Fiber Waviness on the Stiffness of a Polymer Composite Material

The Effect of Structural and Process Parameters on the Effective Properties of Polymer Composites Reinforced by Fiber-rod and Three-dimensional Weaving

Research on Piezoresistive Effect and Random Model of Carbon Fiber Bundle

Effect of Volume Fraction and Fiber Distribution on Stress Transfer in a Stochastic Framework of Continuous Fiber Composite: A Micromechanical Study

The Effect of Nanotube Waviness and Agglomeration on the Elastic Property of Carbon Nanotube-Reinforced Composites

The effect of imperfect bonding on stress distribution in fibrous composites

Mechanics and force transmission in soft composites of rods in elastic gels

On micromechanics approach to stiffness and strength of unidirectional composites

Effects of local incompressibility on the rheology of composite biopolymer networks

Effect of Shear Span-to-depth Ratio on the Mechanical Behavior of Composite Sandwich Beams with GFRP Ribs and Balsa Wood Core Materials

The Effect of Fiber Position and Polymerization Condition on the Flexural Properties of Fiber-Reinforced Composite

The effects of fiber’s surface roughness on the mechanical properties of fiber-reinforced polymer composites

Effect of Fiber Volume Ratio on Flexural Behavior of RC Beam with Novel HFRP Rebar and Steel Rebar

Rigidity percolation in random 3D rod systems

Investigation of elastic modulus and morphology of reinforcement phase on the stress distribution of copper matrix composites

Effect of plant short fibers on the mechanical properties of carbon fiber reinforced epoxy matrix by using FEM based numerical homogenization technique

Investigation of fiber waviness in fused deposition modeling printed continuous fiber-reinforced polymers