Abstract:The accuracy of the distribution network fault location is important to guarantee the safety and reliability of the power system. There are many achievements in the research of fault location technology for the distribution network, but it is still difficult to locate fault of neutral point via arc suppression coil grounding system accurately in the application of single-phase to ground fault line selection or detection, because of the problems of a lack of fault selection components, inaccurate line parameters and expensive phase angle information collection devices. This paper proposes a fault location method of single-phase to ground fault based on least-squares parameter estimation. Taking the zero-sequence equivalent circuit model of single-phase ground fault as the basis, regarding the fault distance, fault resistance and inaccurate line parameters as the unknow parameters, and treating the time domain relationship between the fault zero-sequence voltage and current reflected through the zero-sequence equivalent circuit as fault location equation, the optimum solution of the distance from the fault point to the busbar can be calculated with the least-square parameter estimation method. In addition, the method takes the unknown nature of the parameters into account, and only need to measure the fault three-phase voltage and three-phase current data for determining the fault location without phase angle information. The validity of the method was verified by simulation experiments.

Ground Distance Algorithm for Single-Phase Grounding Fault of Four-Parallel Transmission Lines Based on Twelve-Sequence Component

Single-phase-to-ground Fault Detection with Distributed Parameters Analysis in Non-Direct Grounded Systems

A Two-Terminal Fault Location Algorithm Using Asynchronous Phasors Based on Distributed Parameter Model

New Type Adaptive Distance Relay with Improved Performance

Impact of zero-sequence mutual inductance in UHV Anhui-to-east power transfer lines on phase-earth distance protection

Error Analysis of Distance Relay Protection in Phase-to-Phase Short Circuit Fault

The Algorithm for Locating Ground Faults on Power Distribution Based on Electromagnetic Calculations

A Novel Single-Ended Fault Location Method for Locating Double-Phase to Earth Faults

High-Resistance Grounding Fault Detection and Line Selection in Resonant Grounding Distribution Network

Novel location algorithm for single-line-to-ground faults in transmission line with distributed parameters

An Adaptive Reclosure Scheme for Parallel Transmission Lines with Shunt Reactors

Analysis and Improvement of Algorithm for Solving Differential Equation in Computer Distance Protection of Transmission Line

Fault Location Algorithm Based on Characteristic- Harmonic Measured Impedance for HVdc Grounding Electrode Lines

Research on a New Single-End Fault Location Method for Single-Phase Grounding Faults of Transmission Lines Through Transition Resistance

Transmission Line Fault Location Based on Improved Algorithm of Electromagnetic Time Reversal

Adaptive Autoreclosing Scheme for Line-to-Line Nongrounded Faults on Double-Circuit Transmission Lines Based on Phase-to-Phase Reactive Power

A novel online monitoring method of ground fault in tree form distribution networks based on power line carrier devices

A Single-Phase to Ground Fault Location Method Based on Last-Squares Parameter Estimation in Arc-Suppression-Coil Grounding System

Single-phase ground fault location method for distribution network based on traveling wave time-frequency characteristics

An Earth Fault Diagnosis Method Based On Online Dynamically Calculated Thresholds for Resonant Ground Systems

Locating of Multi-Phase Faults of Ungrounded Distribution System