Abstract:The competition of surface and subsurface crack initiation induced failure is critical to understand very high cycle fatigue(VHCF) behavior, which necessitates the elucidation of the underlying mechanisms for the transition of crack initiation from surface to interior defects. Crack initiation potential in materials containing defects is investigated numerically by focusing on defect types, size, shape, location, and residual stress influences. Results show that the crack initiation potency is higher in case of serious property mismatching between matrix and defects, and higher strength materials are more sensitive to soft inclusions(elastic modulus lower than the matrix). The stress localization around inclusions are correlated to interior crack initiation mechanisms in the VHCF regime such as inclusion-matrix debonding at soft inclusions and inclusion-cracking for hard inclusions(elastic modulus higher than the matrix). It is easier to emanate cracks from the subsurface pores with the depth 0.7 times as large as their diameter. There exists an inclusion size independent region for crack incubation, outside which crack initiation will transfer from the subsurface soft inclusion to the interior larger one. As for elliptical inclusions, reducing the short-axis length can decrease the crack nucleation potential and promote the interior crack formation, whereas the long-axis length controls the site of peak stress concentration. The compressive residual stress at surface is helpful to shift crack initiation from surface to interior inclusions. Some relaxation of residual stress can not change the inherent crack initiation from interior inclusions in the VHCF regime. The work reveals the crack initiation potential and the transition among various defects under the influences of both intrinsic and extrinsic factors in the VHCF regime, and is helpful to understand the failure mechanism of materials containing defects under long-term cyclic loadings.

Review on Surface Failure Mode of Metallic Materials in Very High Cycle Fatigue Regime

Approach to investigate pre-nucleation fatigue damage of cyclically loaded metals using Vickers microhardness tests

Characteristics of the change in the surface microhardness during high cycle fatigue damage

Experimental Characterization of Competition of Surface and Internal Damage in Very High Cycle Fatigue Regime

Titanium Alloy Materials with Very High Cycle Fatigue: A Review

Historical review and future prospect for researches on very high cycle fatigue of metallic materials

Bending Fatigue Behavior of 316L Stainless Steel up to Very High Cycle Fatigue Regime

Subsurface faceted cracking behavior of selective laser melting Ni-based superalloy under very high cycle fatigue

Nanoprecipitates assisting subsurface cracking in high-strength steel under very high cycle fatigue

Fatigue Life and Mechanistic Modeling of Interior Micro-Defect Induced Cracking in High Cycle and Very High Cycle Regimes

Microstructural mechanisms of cyclic deformation, fatigue crack initiation and early crack growth

Influence of microstructure and microdefects on long-term fatigue behavior of a Cr-Mo-V steel

Fatigue crack initiation site transition of high‐strength steel under very high‐cycle fatigue

Evaluation of Fatigue Behaviors of SLMed Ti-6Al-4V in High-Cycle and Very-High-Cycle Regimes Considering Effects of Stress Ratio and Surface Roughness

The Micro-Mechanism of Fatigue Crack Propagation for a Forged Mg–Zn–Y–Zr Alloy in the Gigacycle Fatigue Regime

Fatigue Crack Initiation Potential from Defects in Terms of Local Stress Analysis

GIGACYCLE FATIGUE OF ULTRA-HIGH STRENGTH STEELS

Probabilistic modeling and simulation of multiple surface crack propagation and coalescence

Characteristic and mechanism of crack initiation and early growth of an additively manufactured Ti-6Al-4V in very high cycle fatigue regime

Failure mechanism and life correlation of Inconel 718 in high and very high cycle fatigue regimes

Quantitative Assessment of Microstructural Damage for Interior Crack Initiation and High Cycle Fatigue Life Modeling