Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

Enhancement of laminar convective heat transfer relying on excitation of transverse secondary swirl flow

Enhanced Heat Transfer with Swirl Duct under Rolling and Pitching Environment

Field Synergy Optimization and Enhanced Heat Transfer by Multi-Longitudinal Vortexes Flow in Tube

Internal Flow Analysis of a Heat Transfer Enhanced Tube with a Segmented Twisted Tape Insert

Enhanced turbulent convective heat transfer in helical twisted Multilobe tubes

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Heat Transfer Study of a Hybrid Smooth and Spirally Corrugated Tube

HEAT TRANSFER ENHANCEMENT DUE TO SWIRL EFFECTS IN OVAL TUBES TWISTED ABOUT THEIR LONGITUDINAL AXIS

Compound Heat Transfer Enhancement of Wavy Fin-and-Tube Heat Exchangers through Boundary Layer Restarting and Swirled Flow

Numerical simulation study of enhanced convective heat transfer in the tube based on winglet vortex generator

EXPERIMENTAL AND NUMERICAL INVESTIGATION ON THE HEAT TRANSFER ENHANCEMENT USING LONGITUDINAL VORTICES IN NARROW-CHANNELS

Numerical investigation of convective heat transfer enhancement by a combination of vortex generator and in-tube inserts

Characterization and Scaling of Forced Convective Swirl in Sinusoidal Wavy-Plate-Fin Cores of Compact Heat Exchangers

Design and optimization on symmetrical wing longitudinal swirl generators in circular tube for laminar flow

Role of Three-Dimensional Swirl in Forced Convection Heat Transfer Enhancement in Wavy-Plate-Fin Channels

Enhancement Mechanisms for Single-Phase Turbulent Heat Transfer in Micro-Fin Tubes

Active Enhancement of Convection Heat Transfer of Air in a Rectangular Channel by Magnetically Induced Longitudinal Vortices

Optimization of H-type finned tube heat exchangers with combinations of longitudinal vortex generator, dimples/protrusions and grooves by Taguchi method

Optimization of Flue Gas Convective Heat Transfer with Condensation in a Rectangular Channel

A numerical study of swirl flow in U-bends: In-depth understanding of vortex evolution and cooling performance

Performance optimization of a wavy finned-tube heat exchanger with staggered curved vortex generators