Numerical Simulation and Optimization of Enhanced Heat Transfer in Helical Oval Tubes: Effect of Helical Oval Tube Modification, Pitch Ratio, and Depth Ratio
Pitak Promthaisong,Withada Jedsadaratanachai,Smith Eiamsa-ard
DOI: https://doi.org/10.1080/01457632.2017.1384281
IF: 2.3
2017-11-02
Heat Transfer Engineering
Abstract:Flow and heat transfer behaviors in the helical oval tube, alternate-twisted-direction helical oval tube and regularly spaced helical oval tubes were numerically investigated. The helical oval tubes with eight oval tube depth ratios (0.03, 0.04, 0.05, 0.06, 0.07, 0.10, 0.15, and 0.20) and nine oval tube pitch ratios (0.6, 0.8, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, and 4.0) were examined in turbulent regime, Reynolds number ranged from 5000 to 20,000. The computational results showed that fully developed periodic flow and heat transfer in helical oval tubes commenced at around entrance length to characteristic diameter of 8–9. The decreasing depth ratio and increasing pitch ratio helped to reduce the pressure loss of the tube heat exchanger. The maximum thermal performance of 1.30 was obtained by the use of the helical oval tube with depth ratio of 0.05 and pitch ratio of 0.6 at the lowest Reynolds number of 5000. At similar conditions, typical helical oval tubes offered better heat transfer rate and thermal performance than helical oval tubes with alternate axes and regularly spaced helical oval tubes.
engineering, mechanical,thermodynamics,mechanics