Abstract:Fundamental studies of a new thermal annealing strategy for maximizing proton conductivity and single cell performance of glassy sulfonated hydrocarbon fuel cell membrane materials under both fully and partially hydrated conditions are reported. Directly copolymerized disulfonated poly(arylene ether sulfone) random copolymers (BisA-XX, XX is the mole percent of hydrophilic moieties, XX = 20 to 40) with 2,2'-isopropylidene diphenol swivel ((CH3)(2)-C) units in their polymer backbone were cast from N,N-dimethylacetamide (DMAc) and dried under two different protocols; one set was dried at 60 degrees C (BisA-XX_60 degrees C), and the other at 150 degrees C under vacuum immediately after the initial drying (BisA-XX_150 degrees C). Small amounts of DMAc solvent remained during the second drying step which depressed the glass transition temperatures (T-g) of the BisA copolymers lower than 150 degrees C. BisA-XX_150 degrees C samples were essentially thermally annealed when dried at 150 degrees C. This increased the density of BisA copolymer chains; their T-g values were increased. Moreover, T-1 values of the protons in BisA-XX aromatic phenylene rings measured via solid-state NMR technique were lower as a result of the improved H-1-H-1 dipolar interaction. Interestingly, proton conductivity was improved after thermal annealing, possibly because the sulfonic acid density in the fully hydrated state (i.e., IECv(wet)) was enhanced. The synergistic effect of reduced water uptake and more developed hydrophilic-hydrophobic nanochannel formation may be important. The thermal annealing significantly influenced proton conductivity particularly at a low humidity (30 to 80% relative humidity (RH)). As a result, BisA-XX_150 degrees C samples derived from identical materials exhibited electrochemical polymer electrolyte membrane fuel cell (PEMFC) performances similar and superior to Nafion (R) 112 and BisA-XX_60 degrees C samples measured at 65% RH at 80 degrees C, respectively.

Effect of crosslinking on the durability and electrochemical performance of sulfonated aromatic polymer membranes at elevated temperatures

Effects of Microstructure on the Retention of Proton Conductivity of Nafion/SiO2 Composite Membranes at Elevated Temperatures:An in Situ SAXS Study

Effect of End-Group Cross-Linking on Transport Properties of Sulfonated Poly(phenylene Sulfide Nitrile)s for Proton Exchange Membranes

Effect of “bridge” on the performance of organic-inorganic crosslinked hybrid proton exchange membranes via KH550

Morphological transformation during cross-linking of a highly sulfonated poly(phenylene sulfide nitrile) random copolymer

A novel UV-crosslinked sulphonated polysulfone cation exchange membrane with improved dimensional stability for electrodialysis

Preparation and properties of crosslinked sulphonated poly(sulphide sulphone)membranes for fuel cell applications

The Effects of Temperature and Humidity on the Microstructure of Sulfonated Syndiotactic–polystyrene Ionic Membranes

Cross-linked Sulfonated Poly(arylene Ether Nitrile)s with Low Swelling and High Proton Conductivity

Effect of Crosslinked Chain Length in Sulfonated Polyimide Membranes on Water Sorption, Proton Conduction, and Methanol Permeation Properties

Synergistic Effect of 2-Acrylamido-2-methyl-1-propanesulfonic Acid on the Enhanced Conductivity for Fuel Cell at Low Temperature

Novel Cross-Linked Anion Exchange Membranes with Diamines As Ionic Exchange Functional Groups and Crosslinking Groups

High Performance Sulfonated Poly(arylene Ether Phosphine Oxide) Membranes by Self-Protected Cross-Linking for Fuel Cells

A Cross-Linked Fluorinated Poly (aryl Ether Oxadiazole) S Using a Thermal Cross-Linking for Anion Exchange Membranes

A new and facile approach for the preparation of cross-linked sulfonated poly(sulfide sulfone) membranes for fuel cell application

Effect of Crosslinking Degree on Sulfonated Poly(aryl Ether Nitrile)s As Candidates for Proton Exchange Membranes.

Synthesis and Characterization of Novel Anion Exchange Membranes Based on Semi-Interpenetrating Networks of Functionalized Polysulfone: Effect of Ionic Crosslinking

A New Crosslinked Sulfonated Polystyrene for Proton Exchange Fuel Cell Membrane

A facile, effective thermal crosslinking to balance stability and proton conduction for proton exchange membranes based on blend sulfonated poly(ether ether ketone)/sulfonated poly(arylene ether sulfone)

Solvent-assisted Thermal Annealing of Disulfonated Poly(arylene Ether Sulfone) Random Copolymers for Low Humidity Polymer Electrolyte Membrane Fuel Cells

A Simple Heat Treatment to Prepare Covalently Crosslinked Membranes from Sulfonated Poly(2,6-Dimethyl-1,4-phenylene Oxide) for Application in Fuel Cells