Abstract:Abstract The materialistic viability of proton exchange membrane fuel cells predominantly depends on the membrane properties. Thus, in this paper, an emphasis was made on the preparation of cross‐linked composite electrolyte membranes. Primarily, a terpolymer was synthesized by employing monomers of phenolphthalein, 4,4′‐diflorobenzophenone, and sodium 5,5′‐carbonyl bis(2‐fluorobenzene‐sulfonate). To enhance the mechanical characteristics of the terpolymer, it was cross‐linked with bisphenol‐A diglycidyl ether. Furthermore, to boost the performance of the fuel cell of the cross‐linked terpolymer electrolyte, two different sulfonated single‐walled carbon nanotubes were incorporated into cross‐linked terpolymer matrix and the resulting developed electrolytes, respectively, denoted as Bu‐singe‐walled carbon nanotubes (SWCNTs) and Su‐SWCNTs membranes. The physico‐chemical characteristics of the successive electrolytes were tested using discrete techniques. Across the series of membranes, the proton conductivity of the 12 mass% of Bu‐SWCNTs and Su‐SWCNTs varied cross‐linked composite membrane was found to be 0.131 and 0.126 S cm −1 at 80 °C with a relative humidity of 100%. Similarly, the performance of the fuel cell examination ascertained the highest power density of 0.43 and 0.39 W cm −2 for the same membranes. These results are superior to the commercially available Nafion® 117 membrane. Thereby, the above‐mentioned cross‐linked composite membranes might be utilized as constructive applicants for the fuel cell.

A Simple Heat Treatment to Prepare Covalently Crosslinked Membranes from Sulfonated Poly(2,6-Dimethyl-1,4-phenylene Oxide) for Application in Fuel Cells

High Performance Sulfonated Poly(arylene Ether Phosphine Oxide) Membranes by Self-Protected Cross-Linking for Fuel Cells

Ionically Cross‐Linked Proton Conducting Membranes for Fuel Cells

Sulfonated Oligomer-crosslinked Fluorinated Poly(aryl ether sulfone)-based Proton Exchange Membranes for Fuel Cells

Preparation and properties of crosslinked sulphonated poly(sulphide sulphone)membranes for fuel cell applications

Preparation and properties of covalently cross-linked sulfonated poly(sulfide sulfone)/polybenzimidazole blend membranes for fuel cell applications

Preparation of sulfonated poly(ether ether ketone)s containing amino groups/epoxy resin composite membranes and their in situ crosslinking for application in fuel cells

Cross-linked sulfonated poly(phathalazinone ether ketone)s for PEM fuel cell application as proton-exchange membrane

Poly(4-vinylpyridine) Based Semi-Interpenetrating Cross-Linked High Temperature Proton Exchange Membranes for Fuel Cells

Synthesis and Properties of Sulfonated Polyimide/Polybenzimidazole Cross-Linked Membranes for Fuel Cell Applications

Hybrid acid–base polymer membranes prepared for application in fuel cells

A Novel Crosslinking Organic–inorganic Hybrid Proton Exchange Membrane Based on Sulfonated Poly(arylene Ether Sulfone) with 4-Amino-phenyl Pendant Group for Fuel Cell Application

A new and facile approach for the preparation of cross-linked sulfonated poly(sulfide sulfone) membranes for fuel cell application

Properties and Fuel Cell Performance of Proton Exchange Membranes Prepared from Disulfonated Poly(sulfide Sulfone)

Highly conductive and stable hybrid ionic cross-linked sulfonated PEEK for fuel cell

Synthesis of cross‐linked composite membranes by functionalization of single‐walled carbon nanotubes with 1,4‐butane sultone and sulfanilic acid for fuel cell

Crosslinked High-Performance Anion Exchange Membranes Based on Poly(styrene-B-(ethylene-co-butylene)-b-styrene)

Branched/Crosslinked Sulfonated Polyimide Membranes for Polymer Electrolyte Fuel Cells

Proton Exchange Membranes with Functionalized Sulfonimide and Phosphonic Acid Groups for Next-Generation Fuel Cells Operating at 120 °C

Multiblock Poly(Phenylene Ether Nitrile)S with Pendant Sulfoalkoxyl Side Chain for H-2/Air Fuel Cells at Low Humidity Condition

Novel Preparation Method of Cross-Linked Sulfonated Polyimide Membranes for Fuel Cell Application