Abstract:Fundamental studies of a new thermal annealing strategy for maximizing proton conductivity and single cell performance of glassy sulfonated hydrocarbon fuel cell membrane materials under both fully and partially hydrated conditions are reported. Directly copolymerized disulfonated poly(arylene ether sulfone) random copolymers (BisA-XX, XX is the mole percent of hydrophilic moieties, XX = 20 to 40) with 2,2'-isopropylidene diphenol swivel ((CH3)(2)-C) units in their polymer backbone were cast from N,N-dimethylacetamide (DMAc) and dried under two different protocols; one set was dried at 60 degrees C (BisA-XX_60 degrees C), and the other at 150 degrees C under vacuum immediately after the initial drying (BisA-XX_150 degrees C). Small amounts of DMAc solvent remained during the second drying step which depressed the glass transition temperatures (T-g) of the BisA copolymers lower than 150 degrees C. BisA-XX_150 degrees C samples were essentially thermally annealed when dried at 150 degrees C. This increased the density of BisA copolymer chains; their T-g values were increased. Moreover, T-1 values of the protons in BisA-XX aromatic phenylene rings measured via solid-state NMR technique were lower as a result of the improved H-1-H-1 dipolar interaction. Interestingly, proton conductivity was improved after thermal annealing, possibly because the sulfonic acid density in the fully hydrated state (i.e., IECv(wet)) was enhanced. The synergistic effect of reduced water uptake and more developed hydrophilic-hydrophobic nanochannel formation may be important. The thermal annealing significantly influenced proton conductivity particularly at a low humidity (30 to 80% relative humidity (RH)). As a result, BisA-XX_150 degrees C samples derived from identical materials exhibited electrochemical polymer electrolyte membrane fuel cell (PEMFC) performances similar and superior to Nafion (R) 112 and BisA-XX_60 degrees C samples measured at 65% RH at 80 degrees C, respectively.

Morphological transformation during cross-linking of a highly sulfonated poly(phenylene sulfide nitrile) random copolymer

Effect of “bridge” on the performance of organic-inorganic crosslinked hybrid proton exchange membranes via KH550

Effect of End-Group Cross-Linking on Transport Properties of Sulfonated Poly(phenylene Sulfide Nitrile)s for Proton Exchange Membranes

Effect of crosslinking on the durability and electrochemical performance of sulfonated aromatic polymer membranes at elevated temperatures

Water-stable Crosslinked Sulfonated Polyimide–silica Nanocomposite Containing Interpenetrating Polymer Network

Solvent-assisted Thermal Annealing of Disulfonated Poly(arylene Ether Sulfone) Random Copolymers for Low Humidity Polymer Electrolyte Membrane Fuel Cells

Sulfonated Poly(Arylene Sulfide Sulfone Nitrile) Multiblock Copolymers with Ordered Morphology for Proton Exchange Membranes

Synthesis and Characterization of Novel Anion Exchange Membranes Based on Semi-Interpenetrating Networks of Functionalized Polysulfone: Effect of Ionic Crosslinking

Synthesis Of Crosslinked Sulfonated Poly(Phenylene Sulfide Sulfone Nitrile) For Direct Methanol Fuel Cell Applications

Synergistic Effect of 2-Acrylamido-2-methyl-1-propanesulfonic Acid on the Enhanced Conductivity for Fuel Cell at Low Temperature

Effective proton transport and anti-free radical oxidation: construction of interpenetrating network via co-crosslinking polybenzimidazole with proton conductors

Molecular Dynamics Simulation Study of A Polynorbornene-Based Polymer: A Prediction of Proton Exchange Membrane Design and Performance

Synthesis and Characterization of Poly(Vinylidene Fluoride)-G-Sulfonated Polystyrene Graft Copolymers for Proton Exchange Membrane

High flexible ether-free semi-crystalline fuel cell membranes: Molecular-level design, assembly structure and properties

Novel cross-linked membrane for direct methanol fuel cell application: sulfonated poly(ether ether nitrile)s

Proton Conductivity Improvement of Sulfonated Poly(ether Ether Ketone) Nanocomposite Membranes with Sulfonated Halloysite Nanotubes Prepared Via Dopamine-Initiated Atom Transfer Radical Polymerization

Sulfonamide-Sulfonimide Copolymers as Novel, Fluorine-Lean Type of Proton Exchange Membranes for Fuel Cell Application

Morphological Effect of Side Chain Length in Sulfonated Poly(arylene ether sulfone)s Polymer Electrolyte Membranes via Molecular Dynamics Simulation

A new and facile approach for the preparation of cross-linked sulfonated poly(sulfide sulfone) membranes for fuel cell application

Improving proton conductivity of sulfonated poly (ether ether ketone) proton exchange membranes at low humidity by semi-interpenetrating polymer networks preparation

Synthesis and crosslinking of hydroxyl-functionalized sulfonated poly(ether ether ketone) copolymer as candidates for proton exchange membranes