Abstract:The large deflections of slender ultralight sandwich beams with a metallic foam core are studied under transverse loading by a flat punch, in which interaction of bending and stretching induced by large deflections is considered. Firstly, a unified yield criterion for metallic sandwich structures considering the effect of core strength is proposed, which is valid for metallic sandwich cross-sections with various core strengths and geometries. This can reduce to the yield criterion for a solid monolithic cross-section and the classical yield criterion for sandwich cross-sections with a weak core, respectively. Then, analytical solutions for the large deflections of fully clamped and simply supported metallic foam core sandwich beams are derived under transverse loading by a flat punch, respectively. Comparisons of the present solutions with experimental results are presented and good agreements are found. The effects of the core strength, the size of loading punch and the boundary conditions on the structural response of sandwich beams are discussed in detail. It is shown that the axial stretching induced by large deflections has significant effect on the load-carrying and energy absorption capacities of sandwich structures in the post-yield regime, and the load-carrying and plastic energy absorption capacities of metallic foam core sandwich beams may be underestimated as the core strength is neglected in analysis, especially for the sandwich beams with a strong core.

Low-velocity Impact and Minimum Mass Design of Physically Asymmetric Sandwich Beams with Metal Foam Core

Low-velocity Impact Response of Geometrically Asymmetric Slender Sandwich Beams with Metal Foam Core

Low-velocity Impact Response of Sandwich Beams with a Metal Foam Core: Experimental and Theoretical Investigations

A Theoretical Study of Low-Velocity Impact of Geometrically Asymmetric Sandwich Beams

Plastic Analysis of Multilayer Sandwich Beams with Metal Foam Cores

Dynamic Response of Slender Multilayer Sandwich Beams with Metal Foam Cores Subjected to Low-Velocity Impact

On Physically Asymmetric Sandwich Plates with Metal Foam Core Subjected to Blast Loading: Dynamic Response and Optimal Design

Quasi-static and Low-Velocity Impact Behaviors of Steel-Aluminum Foam Sandwich Beams

Low-velocity impact of clamped Y-shaped sandwich beams with metal foam core

Dynamic Response of Foam-Filled Sandwich Beam with Circular Shape Core under Low-Velocity Impact

Low-Velocity Impact Response of Fully Clamped Metal Foam Core Sandwich Beam Incorporating Local Denting Effect

Three-point Bending of Physically Asymmetric Metal Sandwich Beams with Aluminum Foam Core: Failure Behavior and Optimal Design

Dynamic Response of Slender Multilayer Sandwich Beams with Fiber-Metal Laminate Face-Sheets Subjected to Low-Velocity Impact

An Analytical Solution for the Large Deflections of a Slender Sandwich Beam with a Metallic Foam Core under Transverse Loading by a Flat Punch

Dynamic response of clamped sandwich beams with foam-filled sinusoidal corrugated core subjected to low-velocity impact

The Initial Plastic Failure of Fully Clamped Geometrical Asymmetric Metal Foam Core Sandwich Beams

Low-velocity impact of sandwich beams with fibre-metal laminate face-sheets considering local denting effect

Low-velocity impact of clamped slender rectangular sandwich tubes with metal foam core

Static and Low-Velocity Impact Behavior of Sandwich Beams with Closed-Cell Aluminum-Foam Core in Three-Point Bending

The Mechanical Response of Metallic Sandwich Beams under Foam Projectile Impact Loading

Low-velocity Impact of Rectangular Multilayer Sandwich Plates