Abstract:X-Frame core sandwich structures are fabricated with carbon fiber reinforced polymer (CFRP) face sheets and aluminum alloy cores. The hybrid combination enables composite face sheets to maximize specific flexural stiffness and X-Frame metal core to improve the impact resistance. The effects of impact energy, impact site and face sheet material type on the impact response and resulting damage state have are investigated experimentally and numerically. The low-velocity impact tests are carried out to study the impact response in terms of the impact load, absorbed energy and failure modes. Meanwhile, finite element analysis is implemented to simulate the impact behaviors and failure mechanisms by the VUMAT subroutine in ABAQUS/Explicit, using a progressive damage model based on the Hashin and Yeh delamination failure criteria. For comparison, all-metallic sandwich structures are also studied to better understand the influence of face sheet materials. These studies reveal that impact response and resulting damage state are strongly dependent on the impact energy and impact site. Composite sandwich structure absorbs more impact energy than aluminum sandwich structure for the perforation case, indicating that the former has better impact resistance. The predicted results of the low-velocity impact response are fairly consistent with the experimental measurements, which suggests that the numerical procedure could be a helpful tool in developing novel lightweight multifunctional structures.

Quasi-static and Low-Velocity Impact Behaviors of Steel-Aluminum Foam Sandwich Beams

Effect of Core Densities on Quasi-Static and Low-Velocity Impact Behaviors of AFRP-aluminum Foam Hybrid Sandwich Beams

Static and Low-Velocity Impact Behavior of Sandwich Beams with Closed-Cell Aluminum-Foam Core in Three-Point Bending

On low-velocity impact response of foam-core sandwich panels

Deformation and Failure of Hybrid Composite Sandwich Beams with a Metal Foam Core under Quasi-Static Load and Low-Velocity Impact

Low-velocity Impact Response of Sandwich Beams with a Metal Foam Core: Experimental and Theoretical Investigations

The Structural Response of Clamped Sandwich Beams Subjected to Impact Loading

Low-velocity Impact and Minimum Mass Design of Physically Asymmetric Sandwich Beams with Metal Foam Core

Mechanical properties and energy absorption capabilities of aluminium foam sandwich structure subjected to low-velocity impact

The Mechanical Response of Metallic Sandwich Beams under Foam Projectile Impact Loading

High-velocity impact response of metallic sandwich structures with PVC foam core

Low-velocity Impact Response of Geometrically Asymmetric Slender Sandwich Beams with Metal Foam Core

The influence of asymmetric faces on low-velocity impact failure of CFRP/aluminum foam composite sandwich beams

Low-Velocity Impact Response of Fully Clamped Metal Foam Core Sandwich Beam Incorporating Local Denting Effect

Dynamic Response of Foam-Filled Sandwich Beam with Circular Shape Core under Low-Velocity Impact

Low-velocity impact properties of foam-filled composite lattice sandwich beams: Experimental study and numerical simulation

The dynamic response of sandwich beams with open-cell metal foam cores

On Influence of Face Sheet Distributions on Low-Velocity Impact Failure of Metal Honeycomb Core Sandwich Plates

A Theoretical Study of Low-Velocity Impact of Geometrically Asymmetric Sandwich Beams

Effects of Aluminum Foam Filling on the Low-Velocity Impact Response of Sandwich Panels with Corrugated Cores

Low-velocity Impact Behavior of X-Frame Core Sandwich Structures – Experimental and Numerical Investigation