Abstract:Zinc-based alloys, particularly those alloyed with elements like Ca, Cu, and others, have emerged as promising candidates for biodegradable implants. Therefore, the purpose of this study was to investigate the phase equilibrium relationship of the Ca-Cu-Zn ternary system in the Cu-Zn rich region for Zn-based biodegradable materials development. In this work, 21 and 19 samples were prepared and annealed at the temperatures of 350 and 400 °C, respectively. And Then, these samples were analyzed using analytical techniques including scanning electron microscopy (SEM) coupled with energy dispersion spectroscopy (EDS), electron probe microanalysis (EPMA), and powder X-ray diffraction analysis (XRD). The present obtained results indicate the existence of five regions exhibiting three-phase equilibrium and sixteen regions exhibiting two-phase equilibrium within these two isothermal sections. Additionally, differential scanning calorimetry (DSC) was utilized to determine the phase transition temperatures of alloys with constant values of 12 at% Cu and 40 at% Ca, respectively. Moreover, the CALPHAD method was employed to optimize the thermodynamic parameters of the phases of Ca-Cu-Zn ternary system. The model of the liquid phase was performed using the modified quasi-chemical model (MQM). The compound energy formalism (CEF) model was used to represent the Gibbs free energy of the solid phases. Finally, the experimental measured results could be reproduced well using the present obtained thermodynamic parameters.

Experimental Investigation and Thermodynamic Calculation of the Phase Equilibria in the Cu-Cr-W and Cu-Cr-Mo Systems

Thermodynamic Re-Assessment of the Mn-La Binary System

Thermodynamic Calculation of Phase Equilibria in the C-Mo-Zr System

Experimental Investigation and Thermodynamic Calculation of Phase Equilibria in the Mg-Pb-Sn Ternary System

Experimental Investigation and Thermodynamic Assessment of Phase Equilibria at the Ti-Mn side in the Ti-Mn-Mo Ternary System

First-principles and CALPHAD-type Study of the Ir-Mo and Ir-W Systems

Thermodynamic Description of Phase Equilibria in the C–Mo–W–N Quaternary System

Solidified microstructure and Phase equilibria of the Cu–Cr–X (X=Mg, Y) ternary systems

First-principles calculations, experimental study, and thermodynamic modeling of the Al-Co-Cr system

Experimental Investigation and Thermodynamic Assessment of the Mo–Ni–Zr Ternary System

Phase equilibria thermodynamics and solidified microstructure in the Ag-Cr-Zr system

First-Principles Study of Mechanical and Thermodynamic Properties of Binary and Ternary CoX (X = W and Mo) Intermetallic Compounds

Thermodynamic study of the Ca-Cu-Zn ternary system with key experimental measurements

Experimental study and thermodynamic modeling of the Al-Co-Cr-Ni system

Phase Equilibria of the Cu-in System II: Thermodynamic Assessment and Calculation of Phase Diagram

Thermodynamic description and simulation of solidification microstructures in the Cu–Mg–Zn system

Application of the Thermodynamic Extremal Principle to Diffusion-Controlled Phase Transformations in Fe-C-X Alloys: Modeling and Applications

Experimental Investigation and Thermodynamic Calculations of the Co-Fe-Ti System

Critical Evaluation and Thermodynamic Optimization of the Cr–P and Cr–Fe–P Systems

The Cu–Te system: Phase relations determination and thermodynamic assessment

Experimental Investigation and Thermodynamic Assessment of the Cr–Ti System