Abstract:The microstructural evolution and tensile performance of a meta-stable β-type biomedical Ti−10Mo−6Zr−4Sn−3Nb (Ti-B12) alloy subjected to one-stage aging (OSA) and two-stage aging (TSA) are investigated in this work. The OSA treatment is performed at 510°C for 8 h. The TSA treatments are composed of low-temperature aging and high-temperature aging. In the first step, low-temperature aging is conducted at 325°C for 2 h. In the second step, the aging temperature is the same as that in the OSA. The result of the microstructure evolution shows that the precipitated secondary phase after aging is mainly influenced by the process of phase transition. There is a marked difference in the microstructure of the Ti-B12 alloy subjected to the OSA and TSA treatments. The needle-shaped α phases are precipitated in the parent β phase after the OSA treatment. Conversely, the short shuttle-like α phases precipitated after the TSA treatment are formed in the β matrix with the aid of the role of the isothermal ω transitional phase-assisted phase transition. The electron backscattered diffraction results indicate that the crystallographic orientation relationship of the α phases precipitated during the TSA treatment is basically analogous to those in the OSA treatment. The relatively higher tensile strength of 1,275 MPa is achieved by strengthening the effect of the short shuttle-like α precipitation with a size of 0.123 μm in length during the TSA treatment, associating with a suitable elongation of 12% at room temperature simultaneously. The fracture surfaces of the samples after the OSA and TSA treatments indicate that preventing the coarsening of the α layers in the grain boundaries is favorable for the enhancement of strength of Ti-B12 at room temperature. MTT test was carried out to evaluate the acute cytotoxicity and biocompatibility of the implanted material using L929 cells. The relative proliferation rates of cytotoxicity levels 0, 1, 2, 3, and 4 are ≥100, 80–99, 50–79, 30–49, and 0–29%, respectively. The cytotoxicity of the Ti-B12 alloy is slightly better than that of the Ti−6Al−4V alloy, which can meet the requirements of medical materials for biomedical materials.

Wear Response of Metastable Β-Type Ti–25Nb–2Mo–4Sn Alloy for Biomedical Applications

Wear characteristics of Ti–Nb–Ta–Zr and Ti–6Al–4V alloys for biomedical applications

Microstructure, Mechanical Properties and Dry Wear Resistance of Β-Type Ti–15Mo–xNb Alloys for Biomedical Applications

Wear Behavior of Ti-xNb Biomedical Alloys by Ball Cratering

Investigation of sliding wear, electrochemical corrosion, and biocompatibility of Ti-Nb alloys for biomedical applications

Tribological Behavior and In‐Vitro Biocompatibility of a Newly Designed TiZrNbMoTa High‐Entropy Alloy

Impact of scandium on mechanical properties, corrosion behavior, friction and wear performance, and cytotoxicity of a β-type Ti–24Nb–38Zr–2Mo alloy for orthopedic applications

Sliding and Fretting Wear Behavior of Biomedical Ultrafine-Grained TiNbZrTaFe/Si Alloys in Simulated Physiological Solution

Microstructure and Wear Resistance of Ti-3zr-2sn-3mo-15nb (tlm) Alloy

Deformation behavior of metastable β-type Ti-25Nb-2Mo-4Sn alloy for biomedical applications

Study of Wear Resistance of Centrifugal Cast Binary Titanium Alloys

Microstructural Characteristics And Elevated Temperature Wear Of Ti-11si-16al Alloy

Effects of Nb on Superelasticity and Low Modulus Properties of Metastable Β-Type Ti-Nb-Ta-Zr Biomedical Alloys

Biocompatibility, corrosion, and wear resistance of β titanium alloys for biomedical applications

Corrosion and wear behavior of Ti-5Cu-xNb biomedical alloy in simulated body fluid for dental implant applications

Mechanical and biological properties of Ti–(0–25 wt%)Nb alloys for biomedical implants application

Influence of Isothermal ω Transitional Phase-Assisted Phase Transition From β to α on Room-Temperature Mechanical Performance of a Meta-Stable β Titanium Alloy Ti−10Mo−6Zr−4Sn−3Nb (Ti-B12) for Medical Application

Wear performance of Ti-6Al-4 V titanium alloy through nano-doped lubricants

Corrosion and Wear Performance of Β-Ti Based Biomedical Shape Memory Alloys

Tribological behaviors of Ti–6Al–4V modified by chemical methods

Improved mechanical and wear properties of Ti−35Nb−5Ta−7Zr−xSi alloys fabricated by selective electron beam melting for biomedical application