Abstract:Herein, mesoporous activated carbon (AC) was prepared through potassium hydroxide (KOH) activation of hydrochar derived from the hydrothermal carbonization (HTC) of chickpea stem (CS), and successfully applied to remove methylene blue (MB) dye from aqueous solutions in a batch system. The HTC-CSAC was prepared depending on different impregnation ratios (hydrochar:KOH, 50–150%), impregnation times (12–48 h), activation temperatures (400–600<math>°C</math>) and activation times (30–60 min). To define HTC-CSAC, various analytical techniques such as iodine adsorption number (IAN), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and Brunauer–Emmett–Teller (BET) were used. In the removal process of MB by the best HTC-CSAC with a high IAN of 887 mg g−1 obtained under conditions including impregnation ratio of 70%, activation time of 45 min, activation temperature of 600<math>°C</math> and impregnation time of 24 h, the effects of adsorption parameters such as pH factor (2–10), adsorbent dosage (50–100 mg), initial MB concentration (40–80 mg/L) and contact time (90–180 min) were studied. Besides, a detailed evaluation of the adsorption mechanism for the removal of MB by HTC-CSAC was performed. The Langmuir model indicated the best isotherm data correlation, with a maximum monolayer adsorption capacity (Qmax) of 96.15 mg g−1. The adsorption isotherm findings demonstrated that the MB removal process is feasible, and that this process takes place through the physical interaction mechanism. Additionally, the HTC-CSAC adsorbent exhibited a high regeneration and reuse performance in MB removal. After five consecutive adsorption-desorption cycles, HTC-CSAC maintained the reuse efficiency of 77.86%. As a result, the prepared HTC-CSAC with a high BET surface area of 455 m2 g−1 and an average pore diameter of 105 Å could be recommended as a promising and reusable adsorbent in the treatment of synthetic dyes in wastewaters.Graphical Mesoporous activated carbon (AC) was prepared through KOH activation of hydrochar derived via hydrothermal carbonization (HTC) of chickpea stem (CS).The BET surface area and average pore diameter of HTC-CSAC were 455 m2 g−1 and 105 Å, respectively.The removal of MB dye by the best HTC-CSAC with a high IAN of 887 mg g−1, was studied using RSM optimization.The adsorption isotherm findings demonstrated that the MB removal process is feasible, and that this process takes place through the physical interaction mechanism.The HTC-CSAC adsorbent exhibited a high regeneration and reuse performance in MB removal.

Thermal regeneration study of high surface area activated carbon obtained from coconut shell: Characterization and application of response surface methodology

Adsorption of Volatile Organic Compounds and Microwave 1 Regeneration on Self-Prepared High-Surface-Area Beaded Activated 2 Carbon

Removal of Methylene Blue, Chromium (VI), and Phenol from Water via Steam-Activated Coconut Endocarp Carbon in a Semi-Industrial Kiln

Preparation of High-Surface-Area Activated Carbon from Coconut Shell Fibers

Preparation and characterization of activated carbon from hydrochar by hydrothermal carbonization of chickpea stem: an application in methylene blue removal by RSM optimization

Comprehending adsorption of methylethylketone and toluene and microwave regeneration effectiveness for beaded activated carbon derived from recycled waste bamboo tar

Methylene blue dye adsorption onto activated carbon developed from Calicotome villosa via H3PO4 activation

Activated carbon derived from sugarcane and modified with natural zeolite for efficient adsorption of methylene blue dye: experimentally and theoretically approaches

Thermodynamics and Regeneration Studies of CO2 Adsorption on Activated Carbon

Pyrolyzed coal base high surface area and mesoporous activated carbon for methyl violet 2B dye removal: Optimization of preparation conditions and adsorption key parameters

A facile modification method of activated carbon by spark discharge of atmospheric pressure plasma jets to improve its adsorption performance of methylene blue

Statistical modeling of methylene blue dye adsorption by high surface area mesoporous activated carbon from bamboo chip using KOH-assisted thermal activation

Systematic study of dynamic CO2 adsorption on activated carbons derived from different biomass

REGENERATION OF ACTIVATED CARBON AFTER ADSORPTION OF DYE USING PERACETIC ACID. PART 2: ROLE OF PERACETIC ACID IN THE OXIDATION STEP

Regeneration of acid orange 7-exhausted granular activated carbons with microwave irradiation.

Carbon Dioxide Adsorption by a High-Surface-Area Activated Charcoal

Coconut shell carbon via phosphoric acid activation for rhodamine B, malachite green, and methylene blue adsorption – equilibrium and kinetics

Microwave steam activation, an innovative pyrolysis approach to convert waste palm shell into highly microporous activated carbon

Preparation of a highly functionalized activated carbon from waste third-monomer pressure filter liquid for removal of methylene blue in aqueous solution

Facile synthesis of micro-mesoporous activated carbon in ambient air via one and two - stage activation of palm kernel shell waste for methylene blue adsorption

Enhancing methylene blue removal: synthesis, characterization, and performance evaluation of chemically activated carbon adsorbents