Abstract:This study investigated the feasibility of using/reusing commercial activated carbon (CAC) for the capture of high molecular weight and high-boiling point volatile organic compounds (HBPVOCs). The CAC was first characterized using proximate analysis, heat value analysis, iodine value analysis, element analysis, inductively coupled plasma spectrometry, and specific surface area analysis. We then assessed the adsorption/desorption performance of a CAC-based PSA system for the removal of Butyl Cellosolve (BCS), a HBPVOC commonly used in paints, coatings, cleaners, and industrial processes. This involved deriving the BCS adsorption capacity of CAC as a function of adsorbent quantity (2.5, 5, and 10 g), flow rate (4, 6, and 8 L/min), and pressure (1.3, 2.3, and 3.4 kg/cm 2 ). The BCS adsorption capacity of the CAC varied with pressure as follows: 1.3 kg/cm 2 (652.85 mg/g), 2.3 kg/cm 2 (817.20 mg/g) and 3.4 kg/cm 2 (1324.05 mg/g). The adsorption mode most closely resembled pseudo-first-order kinetics (i.e. single-layer physical adsorption). Desorption was performed using an adjustable tubular high-temperature furnace under a nitrogen atmosphere (0.93 kg/cm 2 ). Following desorption with a set desorption duration of 1 hr, the BET values varied with temperature as follows: 350°C (75.58% of the original value) and 450°C (86.04% of the original). Desorbed CAC (DCAC) was also examined to detect changes in pore structure due to the effects of recycling. We obtained breakthrough curves and a dsorption capacity curves of CAC as functions of flow rate and pressure. We also investigated adsorption performance under pressure swing conditions from the perspective of reaction kinetics and density functional theory. Our results demonstrate the efficacy of CAC in the adsorption of BCS as well as the recyclability of this material. Implications: This study demonstrates the potential for reusing commercial activated carbon (CAC) to capture high molecular weight and high-boiling point volatile organic compounds (HBPVOCs). Through comprehensive characterization and performance evaluation, we found that CAC effectively adsorbs Butyl Cellosolve (BCS), a common industrial solvent, with adsorption capacity increasing with pressure. The adsorption process follows pseudo-first-order kinetics, indicating single-layer physical adsorption. Additionally, the study highlights the recyclability of CAC, as desorption and subsequent analysis revealed minimal changes in pore structure, maintaining a significant portion of its original BET value. These findings suggest that CAC is not only effective for BCS adsorption but also sustainable for repeated use, offering an efficient and eco-friendly solution for managing industrial HBPVOCs.

Adsorption of Volatile Organic Compounds and Microwave 1 Regeneration on Self-Prepared High-Surface-Area Beaded Activated 2 Carbon

Comprehending adsorption of methylethylketone and toluene and microwave regeneration effectiveness for beaded activated carbon derived from recycled waste bamboo tar

Desorption of Non-Polar Organics on PDVB Resin under Microwave Radiation Cooperated with Atomized Water

Regeneration of Caramel Saturated Activated Carbon Jointly by Microwave and Extractive Method

Hierarchical Pore Structure of Activated Carbon Fabricated by CO2/microwave for Volatile Organic Compounds Adsorption

Thermal regeneration study of high surface area activated carbon obtained from coconut shell: Characterization and application of response surface methodology

Reaction kinetics and isotherms of commercial activated carbon in variable pressure adsorption of high compound VOCs

Superheated water pretreatment combined with CO2 activation/regeneration of the exhausted activated carbon used in the treatment of industrial wastewater.

Preparation of High Surface Area Activated Carbon from Spent Phenolic Resin by Microwave Heating and KOH Activation

New Activated Carbon with High Thermal Conductivity and Its Microwave Regeneration Performance

Removal of Benzene and Methyl Ethyl Ketone Vapor: Comparison of Hypercrosslinked Polymeric Adsorbent with Activated Carbon.

Microwave-assisted Preparation of Almond Shell-Based Activated Carbon for Methylene Blue Adsorption

Adsorption of Organic Compounds on Adsorbents Obtained with the Use of Microwave Heating

Removal of Congo Red and Methylene Blue Using H2O2 Modified Activated Carbon by Microwave Regeneration: Isotherm and Kinetic Studies

Preparation of Activated Carbons from Cotton Stalk by Microwave Assisted KOH and K2CO3 Activation

Waste Phenolic Resin Derived Activated Carbon By Microwave-Assisted Koh Activation And Application To Dye Wastewater Treatment

Adsorption Performance of Acetone on Activated Carbon Modified by Microwave Heating and Alkali Treatment

Preparation of Activated Carbons by Microwave Heating KOH Activation

PREPARATION OF HIGH SURFACE AREA ACTIVATED CARBON BY MICROWAVE HEATING INDUCE CHEMICAL ACTIVATION

Study on microwave regeneration of phenol exhausted activated carbon

Enhanced benzene vapor adsorption through microwave-assisted fabrication of activated carbon from peanut shells using ZnCl2 as an activating agent