Abstract:Microporous- and mesoporous-activated carbons were produced from longan seed biomass through physical activation with CO2 under the same activation conditions of time and temperature. The specially prepared mesoporous carbon showed the maximum porous properties with the specific surface area of 1773 m2/g and mesopore volume of 0.474 cm3/g which accounts for 44.1% of the total pore volume. These activated carbons were utilized as porous adsorbents for the removal of methylene blue (MB) from an aqueous solution and their effectiveness was evaluated for both the adsorption kinetics and capacity. The adsorption kinetic data of MB were analyzed by the pseudo-first-order model, the pseudo-second-order model, and the pore-diffusion model equations. It was found that the adsorption kinetic behavior for all carbons tested was best described by the pseudo-second-order model. The effective pore diffusivity (De) derived from the pore-diffusion model had the values of 4.657 × 10−7–6.014 × 10−7 cm2/s and 4.668 × 10−7–19.920 × 10−7 cm2/s for the microporous- and mesoporous-activated carbons, respectively. Three well-known adsorption models, namely the Langmuir, Freundlich and Redlich–Peterson equations were tested with the experimental MB adsorption isotherms, and the results showed that the Redlich–Peterson model provided the overall best fitting of the isotherm data. In addition, the maximum capacity for MB adsorption of 1000 mg/g was achieved with the mesoporous carbon having the largest surface area and pore volume. The initial pH of MB solution had virtually no effect on the adsorption capacity and removal efficiency of the methylene blue dye. Increasing temperature over the range from 35 to 55 °C increased the adsorption of methylene blue, presumably caused by the increase in the diffusion rate of methylene blue to the adsorption sites that could promote the interaction frequency between the adsorbent surface and the adsorbate molecules. Overall, the high surface area mesoporous carbon was superior to the microporous carbon in view of the adsorption kinetics and capacity, when both carbons were used for the removal of MB from an aqueous solution.

Facile synthesis of micro-mesoporous activated carbon in ambient air via one and two - stage activation of palm kernel shell waste for methylene blue adsorption

Physical Properties Analysis of Activated Carbon from Oil Palm Empty Fruit Bunch Fiber on Methylene Blue Adsorption

Post‐combustion carbon dioxide adsorption of concurrent activated and surface modified palm kernel shell‐derived activated carbon

Concurrent activation and surface modification (CAM) process to produce surface-modified palm kernel shell-derived activated carbon (PKSdAC)

Microwave steam activation, an innovative pyrolysis approach to convert waste palm shell into highly microporous activated carbon

A sustainable and economical solution for CO2 capture with biobased carbon materials derived from palm kernel shells

Production of palm kernel shell-based activated carbon by direct physical activation for carbon dioxide adsorption

Adsorption study of methylene blue dye using activated carbon prepared from waste palm fiber

Adsorption studies of methylene blue using mangosteen shell porous biochar as adsorbent

Green adsorbent for CO2 adsorption: MgO impregnated palm kernel shell-based activated carbon

The Use of High Surface Area Mesoporous-Activated Carbon from Longan Seed Biomass for Increasing Capacity and Kinetics of Methylene Blue Adsorption from Aqueous Solution

Statistical modeling of methylene blue dye adsorption by high surface area mesoporous activated carbon from bamboo chip using KOH-assisted thermal activation

Insight into the KOH/KMnO<sub>4</sub> activation mechanism of oxygen-enriched hierarchical porous biochar derived from biomass waste by <i>in-situ</i> pyrolysis for methylene blue enhanced adsorption

Low temperature physical activation of raw charcoal for excellent dye adsorption kinetics

Insight into the KOH/KMnO4 activation mechanism of oxygen-enriched hierarchical porous biochar derived from biomass waste by in-situ pyrolysis for methylene blue enhanced adsorption

Characterization and Adsorption Mechanism of Methylene Blue Dye by Mesoporous Activated Carbon Prepared from Rice Husks

Methylene blue dye adsorption onto activated carbon developed from Calicotome villosa via H3PO4 activation

Biochar-derived activated carbons: a comprehensive assessment of kinetic and isotherm modeling for adsorptive removal of methylene blue dye contaminants

High surface area and mesoporous activated carbon from KOH-activated dragon fruit peels for methylene blue dye adsorption: Optimization and mechanism study

Production of activated carbon as catalyst support by microwave pyrolysis of palm kernel shell: a comparative study of chemical versus physical activation

Enhanced removal of methylene blue from water by mesopore-dominant biochar from kelp: Kinetic, equilibrium and thermodynamic studies