Abstract:The different turbulence models are adopted to simulate NASA-MarkII high pressure air-cooled gas turbine. The experimental work condition is Run 5411. The paper researches that the effect of different turbulence models for the flow and heat transfer characteristics of turbine. The turbulence models include: the laminar turbulence model, high Reynolds number k-ε turbulence model, low Reynolds number turbulence model (k-ω standard format, k-ω-SST and k-ω-SST-γ-θ) and B-L algebra turbulence model which is adopted by the compiled code. The results show that the different turbulence models can give good flow characteristics results of turbine, but the heat transfer characteristics results are different. Comparing to the experimental results, k-ω-SST-θ-γ turbulence model results are more accurate and can simulate accurately the flow and heat transfer characteristics of turbine with transition flow characteristics. But k-ω-SST-γ-θ turbulence model overestimates the turbulence kinetic energy of blade local region and makes the heat transfer coefficient higher. It causes that local region temperature is higher. The results of B-L algebra turbulence model show that the results of B-L model are accurate besides it has 4% temperature error in the transition region. As to the other turbulence models, the results show that all turbulence models can simulate the temperature distribution on the blade pressure surface except the laminar turbulence model underestimates the heat transfer coefficient of turbulence flow region. On the blade suction surface with transition flow characteristics, high Reynolds number k-ε turbulence model overestimates the heat transfer coefficient and causes the blade surface temperature is high about 90K than the experimental result. Low Reynolds number k-ω standard format and k-ω-SST turbulence models also overestimate the blade surface temperature value. So it can draw a conclusion that the unreasonable choice of turbulence models can cause biggish errors for conjugate heat transfer problem of turbine. The combination of k-ω-SST-γ-θ model and B-L algebra model can get more accurate turbine thermal environment results. In addition, in order to obtain the affect of different turbulence models for gas turbine conjugate heat transfer problem. The different turbulence models are adopted to simulate the different computation mesh domains (First case and Second case). As to each cooling passages, the first case gives the wall heat transfer coefficient of each cooling passages and the second case considers the conjugate heat transfer course between the cooling passages and blade. It can draw a conclusion that the application of heat transfer coefficient on the wall of each cooling passages avoids the accumulative error. So, for the turbine vane geometry models with complex cooling passages or holes, the choice of turbulence models and the analysis of different mesh domains are important. At last, different turbulence characteristic boundary conditions of turbine inner-cooling passages are given and K-ω-SST-γ-θ turbulence model is adopted in order to obtain the effect of turbulence characteristic boundary conditions for the conjugate heat transfer computation results. The results show that the turbulence characteristic boundary conditions of turbine inner-cooling passages have a great effect on the conjugate heat transfer results of high pressure gas turbine.

Film Cooling Modeling of Turbine Blades Using Algebraic Anisotropic Turbulence Models

Application of Algebraic Anisotropic Turbulence Models to Film Cooling Flows

Algebraic Anisotropic Turbulence Modeling Of Compound Angled Film Cooling Validated By Piv And Psp Measurements

Algebraic Anisotropic Turbulence Modeling of Compound Angled Film Cooling Validated by Particle Image Velocimetry and Pressure Sensitive Paint Measurements

Full Field Algebraic Anisotropic Eddy Viscosity Model for the Film Cooling Flows

Algebraic Anisotropic Eddy-Viscosity Modeling for Application to Turbulent Film Cooling Flows

Application of the anisotropic eddy-viscosity model to film cooling flows with different geometries

Uncertainty Quantification of the Superposition Film Cooling with Trench Using Supervised Machine Learning

ON THE RELIABILITY OF RANS TURBULENCE MODELS FOR ENDWALL COOLING PREDICTION

A Novel Model for CFD-Based Throughflow Analysis of Film-Cooled Turbine Blade

NUMERICAL INVESTIGATION OF DIFFERENT TURBULENCE MODELS APPLIED IN COMBINED IMPINGEMENT AND FILM COOLING

Numerical Investigation Of Coolant-To-Mainstream Scaling Parameters With Film Cooling On Pressure And Suction Side Of A Gas Turbine Blade

Evaluation of Film Cooling Adiabatic Effectiveness and Net Heat Flux Reduction on a Flat Plate Using Scale-Adaptive Simulation and Stress-Blended Eddy Simulation Approaches

Algebraic Anisotropic Eddy Viscosity Model for Separated Flows of Internal Cooling Channels

Numerical Investigation of Film Cooling Effectiveness on a Rotating Turbine Blade Model

Exploiting Active Subspace for Modeling Uncertainty and Optimization in Fan-Shaped Film Cooling Simulation

The Simulation Study of Turbulence Models for Conjugate Heat Transfer Analysis of a High Pressure Air-Cooled Gas Turbine

Numerical simulation of linear cascade film cooling for different blowing ratios

Data-Driven Turbulence Modeling for Film Cooling Heat Transport, Part I: Turbulent Heat Transport Property at Wide Flow Conditions

Influence of Simplifications of Blade in Gas Turbine on Film Cooling Performance

Conjugate Heat Transfer Simulation and Entropy Generation Analysis of Gas Turbine Blades