Abstract:Film cooling technology is significant for aero-turbines development. However, uncertainty on operating and manufacturing conditions would put the high-pressure turbines at the risk of unexpected problems. To extend the service life of the gas turbines, it is necessary to conduct an uncertainty analysis of the effects of the geometry parameters at different blowing ratios on film cooling performance. A classical flat-plate film cooling model under the multiple-row superposition conditions with trench is investigated in this study. The uncertainty inputs included the hole location, depth, and width of the trench and compound angle, while the lateral-averaged film cooling effectiveness was seen as the output. To reduce the computational cost, a Multilayer Perceptron (MLP) model based on supervised learning is built to model the nonlinear regression between the film cooling parameters and the film cooling effectiveness. The computational Fluid Dynamics (CFD) method was utilized to provide the training dataset. After rigorous validation and comparison, the MLP model shows higher accuracy and performance than other classical methods. Then the statistical flow and thermal characteristics of the film cooling outputs and variance were analyzed by the Monte Carlo simulation method. Results of sensitivity analysis show that the uncertainty of compound angle has the greatest effect at both low and high blowing ratios, followed by the location of the first row, trench width, and depth. Besides that, the hole pitch upstream gains more influence than those downstream. Also, both at low and high blowing ratios, the uncertain interval due to compound angle is the biggest, and the uncertain interval due to the hole location of the last row is the smallest. In the design and manufacturing process, it is believed that the uncertainty of compound angle, the hole location of the first row, depth and width of the trench should be paid extra attention to.(c) 2022 Elsevier Ltd. All rights reserved.

Algebraic Anisotropic Turbulence Modeling Of Compound Angled Film Cooling Validated By Piv And Psp Measurements

Algebraic Anisotropic Turbulence Modeling of Compound Angled Film Cooling Validated by Particle Image Velocimetry and Pressure Sensitive Paint Measurements

Film Cooling Modeling of Turbine Blades Using Algebraic Anisotropic Turbulence Models

Application of Algebraic Anisotropic Turbulence Models to Film Cooling Flows

Algebraic Anisotropic Eddy-Viscosity Modeling for Application to Turbulent Film Cooling Flows

Full Field Algebraic Anisotropic Eddy Viscosity Model for the Film Cooling Flows

Uncertainty Quantification of the Superposition Film Cooling with Trench Using Supervised Machine Learning

Application of the anisotropic eddy-viscosity model to film cooling flows with different geometries

ON THE RELIABILITY OF RANS TURBULENCE MODELS FOR ENDWALL COOLING PREDICTION

Algebraic Anisotropic Eddy Viscosity Model for Separated Flows of Internal Cooling Channels

Developing a Scalar Flux Model Solely Based on Mean Flow Quantities for the Film Cooling Jet Flow

Evaluation of Film Cooling Adiabatic Effectiveness and Net Heat Flux Reduction on a Flat Plate Using Scale-Adaptive Simulation and Stress-Blended Eddy Simulation Approaches

NUMERICAL INVESTIGATION OF DIFFERENT TURBULENCE MODELS APPLIED IN COMBINED IMPINGEMENT AND FILM COOLING

Analysis and Modeling of Turbulence Anisotropy of a Swirled Hot Streak Flow

Effects of Wall Curvature and Streamwise Pressure Gradient on Film Cooling Effectiveness

Data-Driven Turbulence Modeling for Film Cooling Heat Transport, Part I: Turbulent Heat Transport Property at Wide Flow Conditions

Numerical Investigation Of Coolant-To-Mainstream Scaling Parameters With Film Cooling On Pressure And Suction Side Of A Gas Turbine Blade

Numerical Simulations of the Near-Field Region of Film Cooling Jets Under High Free Stream Turbulence: Application of RANS and Hybrid URANS/Large Eddy Simulation Models

Scalar Diffusion Equation-Based Model to Predict 2-Dimensional Film Cooling Effectiveness of a Shaped Hole

HIGH-FIDELITY COMPUTATIONAL ASSESSMENT OF AERO-THERMAL PERFORMANCE AND THE REYNOLDS' ANALOGY FOR ADDITIVELY MANUFACTURED ANISOTROPIC SURFACE ROUGHNESS

Heat transfer and flow structure characteristics of film-cooled leading edge model with sweeping and normal jets