Abstract:Friction or lubrication process is a typical process of the energy dissipation. It can be reasonably described and speculated by using the entropy increase and dissipative structure theory of the non-equilibrium thermodynamics. In this paper, we model and analyze the typical thin-film lubrication mechanism based on the theory of thermodynamics, by using the interfacial disjoining pressure to characterize the dominant role of the solid-lubricant interaction on a microscale and establishing the lubrication Stribeck curve based on thermodynamic concepts. The concept of entropy production is adopted to describe the lubrication system, which is defined as the sum of multiplications of the thermodynamic forces and flows. Then the variations and the competing relations between the pairs of thermodynamic forces and flows could be used to reveal the different factors dominated in the lubrication system, such as the solid-liquid interaction, the sliding velocity, and the normal load. In this paper, we assume that all the dissipated energy caused by the viscous resistance of lubricant is converted into heat, then the total entropy increase per surface area at the frictional interface is considered, affected by interfacial disjoining pressure and the one-dimensional heat flow. With the entropy increasing analysis of lubrication process, we find that when the entropy production in the steady state becomes minimum, the total energy dissipation due to friction also becomes minimum, which directly indicates the lowest friction coefficient point at the lubrication Stribeck curve. Moreover, when a lubrication system loses its stability slightly from the equilibrium state, self-organization may occur at the solid-lubricant interface, thus resulting in partially ordering interfacial structures, which may indicate the interfacial structures when tribosystem turns from hydrodynamic lubrication phase into thin-film lubrication phase. In the experimental aspect, the location of the lowest friction coefficient point at the Stribeck curve has a very good correspondence to the minimum entropy point predicted by our thermodynamic model, and the lubrication transition process from hydrodynamic phase to thin-film phase can be explained quite well by the theory of dissipative structures when the system loses its stability. Furthermore, a calculation model of the friction coefficient for thin-film lubrication is obtained when considering the dominant contribution of the solid-lubricant interfacial interaction through an equivalent force method. The calculation data correspond well to the experimental results. In summary, thermodynamic model could effectively characterize the lubrication process in mechanism by revealing the involved multi-scale effect, multi-physical effect and nonlinear coupling effect.

Theoretical Study on Tribological Mechanism of Solid Lubricating Films in a Sand–Dust Environment

Tribological behavior of carbon steel 45 and brass H90 in dry sliding on bearing steel GCr15 in the sand-dust environment

Thermodynamic Analysis of Lubrication Considering Solid-Liquid Interface Interaction

Tribological Performance and Model Establishment of Self-Compensating Lubrication Film Inspired by the Functional Surfaces of Scapharca subcrenata Shells

Tribological mechanism of micro/meso/macroscopic textured surfaces under different normal forces, relative velocities, and sliding directions

Research progress of surface modification and solid–liquid lubrication synergistic friction reduction and wear resistance

Tribological mechanisms of slurry abrasive wear

Wear model based on real-time surface roughness and its effect on lubrication regimes

Frictional Behaviour of Engineering Surfaces in Overall Lubrication Regimes of Point Contacts

On Lubrication States after a Running-In Process in Aqueous Lubrication.

Thermodynamics Model for Stribeck Curve and Experiments: the Role of Interfacial Interaction

A Study of Tribological Performance Prediction Based on Surface Texture Parameters

Tribofilm Formation and Friction Reduction Performance on Laser-Textured Surface with Micro-Grooved Structures

Theoretical and experimental study on influences of surface texture on lubrication performance of a novel bearing

A Pocket-Textured Surface for Improving the Tribological Properties of Point Contact under Starved Lubrication

Simulations And Measurements Of Sliding Friction Between Rough Surfaces In Point Contacts: From Ehl To Boundary Lubrication

Evaluation of tribological performance for laser textured surfaces with diverse wettabilities under water/oil lubrication environments

Mechanisms of abrasive wear in lubricated contacts

Insights into modeling approaches for boundary- and mixed-lubricated conditions

Influence of Third Particle on the Tribological Behaviors of Diamond-like Carbon Films

Atomic-Scale Understanding on the Tribological Behavior of Amorphous Carbon Films under Different Contact Pressures and Surface Textured Shapes