Abstract:Optical tweezers are constantly evolving micromanipulation tools that can provide piconewton force measurement accuracy and greatly promote the development of bioscience at the single-molecule scale. Consequently, there is an urgent need to characterize the force field generated by optical tweezers in an accurate, cost-effective, and rapid manner. Thus, in this study, we conducted a deep survey of optically trapped particle dynamics and found that merely quantifying the response amplitude and phase delay of particle displacement under a sine input stimulus can yield sufficiently accurate force measurements. In addition, Nyquist-Shannon sampling theorem suggests that the entire recovery of the accessible particle sinusoidal response is possible, provided that the sampling theorem is satisfied, thereby eliminating the requirement for high-bandwidth (typically greater than 10 kHz) detectors. Based on this principle, we designed optical trapping experiments by loading a sinusoidal signal into the optical tweezers system and recording the trapped particle responses with 45 frames per second (fps) charge-coupled device (CCD) and 163 fps complementary metal-oxide-semiconductor (CMOS) cameras for video microscopy imaging. The experimental results demonstrate that the use of low-bandwidth detectors is suitable for highly accurate force quantification, thereby greatly reducing the complexity of constructing optical tweezers. The trap stiffness increases significantly as the frequency increases, and the experimental results demonstrate that the trapped particles shifting along the optical axis boost the transversal optical force.

Calibration of Stiffness of Optical Tweezers in Three Dimensions with Power Spectral Density Method

A Focal Spot with Variable Intensity Distribution for Optical Tweezers

Calibration of Optical Tweezers Based on Acousto-Optic Deflector and Field Programmable Gate Array

Simulation for the trapping force on Mie micro-particles in optical tweezers

Relaxing constraints on data acquisition and position detection for trap stiffness calibration in optical tweezers

Arbitrary Manipulation of Micro-Particles in Three Dimensions by Steering of Multiple Orbital Angular Momentum Modes

3D Calibration of Microsphere Position in Optical Tweezers Using the Back-Focal-plane Interferometry Method.

Accurate Calibration of Optical Tweezers close to a glass surface using interference rings in backscattered light

Optically Trapped Particle Dynamic Responses under Varying Frequency Sinusoidal Stimulus

Actual Sensing Sensitivity and SNR Measurement of Optical Tweezers Based on Coulomb Force Input

Optical Tweezers: A Comprehensive Tutorial from Calibration to Applications

Comparing Femtosecond Optical Tweezers with Conventional CW Optical Tweezers

Simulation and Measurement of Stiffness for Dual Beam Laser Trap Using Residual Gravity Method

Enhancing the Applied Force and Range of Axial Optical Tweezers

Optical Calibration of Holographic Acoustic Tweezers

Video Microscopy-Based Accurate Optical Force Measurement by Exploring a Frequency-Changing Sinusoidal Stimulus

Fast and versatile optical force measurement with digitally modulated stimulus in holographic optical tweezers

Calibration of the oscillation amplitude of quartz tuning fork-based force sensors with astigmatic displacement microscopy

Supercontinuum trap stiffness measurement using a confocal approach.

Dynamic Behavior of Tuning Fork Shear-Force Structures in a SNOM System

Optical Tweezers Apparatus Based on a Cost-Effective IR Laser—Hardware and Software Description