Abstract:Aiming at absolute force calibration of optical tweezers, following a critical review of proposed theoretical models, we present and test the results of MDSA (Mie-Debye-Spherical Aberration) theory, an extension of a previous (MD) model, taking account of spherical aberration at the glass/water interface. This first-principles theory is formulated entirely in terms of experimentally accessible parameters (none adjustable). Careful experimental tests of the MDSA theory, undertaken at two laboratories, with very different setups, are described. A detailed description is given of the procedures employed to measure laser beam waist, local beam power at the transparent microspheres trapped by the tweezers, microsphere radius and the trap transverse stiffness, as a function of radius and height in the (inverted microscope) sample chamber. We find generally very good agreement with MDSA theory predictions, for a wide size range, from the Rayleigh domain to large radii, including the values most often employed in practice, and at different chamber heights, both with objective overfilling and underfilling. The results asymptotically approach geometrical optics in the mean over size intervals, as they should, and this already happens for size parameters not much larger than unity. MDSA predictions for the trapping threshold, position of stiffness peak, stiffness variation with height, multiple equilibrium points and `hopping' effects among them are verified. Remaining discrepancies are ascribed to focus degradation, possibly arising from objective aberrations in the infrared, not yet included in MDSA theory.

Accurate Calibration of Optical Tweezers close to a glass surface using interference rings in backscattered light

Calibration of Optical Tweezers Using Time of Flight Method

3D Calibration of Microsphere Position in Optical Tweezers Using the Back-Focal-plane Interferometry Method.

Relaxing constraints on data acquisition and position detection for trap stiffness calibration in optical tweezers

Extending calibration-free force measurements to optically-trapped rod-shaped samples

Enhancing the Applied Force and Range of Axial Optical Tweezers

Towards absolute calibration of optical tweezers

In Situ Calibrating Optical Tweezers with Sinusoidal-Wave Drag Force Method

Quantitative measurements of force and displacement using an optical trap

Optical tweezers for trapping in a microfluidic environment

Optically Trapped Particle Dynamic Responses under Varying Frequency Sinusoidal Stimulus

Absolute Position Total Internal Reflection Microscopy with an Optical Tweezer

Oscillatory Disturbance in Force Calibration of Optical Tweezers

Plasmonic nano-optical trap stiffness measurements and design optimization

Optical Calibration of Holographic Acoustic Tweezers

Force Spectroscopy with Dual-Trap Optical Tweezers: Molecular Stiffness Measurements and Coupled Fluctuations Analysis

Force Calibration of A Dual-Probe Nanotweezer Using A Mechanical Lever

A Force Calibration Standard for Magnetic Tweezers

Displacement Calibration of Optical Tweezers with Gravitational Acceleration

Experimental Measurement of the Trapping Force Acting on a Yeast Cell with a Lensed Optical Fiber Probe

A Calibration Method for Optical Trap Force by Use of Electrokinetic Phenomena