Simulation and Measurement of Stiffness for Dual Beam Laser Trap Using Residual Gravity Method
Zhenggang Li,Yu Shen,Huizhu Hu,Bo Jia,Minqiang Tie
DOI: https://doi.org/10.1504/ijnt.2015.071796
2015-01-01
International Journal of Nanotechnology
Abstract:Dual-beam optical trap is constituted by two beams of unfocused counter-propagating laser. It has advantages such as several equilibrium points, small optical power density, large capture range and easier integration with other technologies, which optical tweezers may not achieve. Dual-beam optical trap stiffness is an important parameter to describe its mechanical properties. On the basis of quartz-substrate dual-beam optical fibre trap unit, we demonstrate a simple method for measuring stiffness. Residual gravity offset by buoyancy may provide a tiny force for the optical trap. By measuring the relations between the captured particle's axial equilibrium position and residual gravity, we may calibrate the optical trap stiffness. This method simply requires measuring the relative position of the particle in the steady state of the optical trap, and dynamic measurement of the particle's location is not needed, so we can get a high position accuracy by long time measuring, thus the accuracy of the stiffness' calibration is improved. In this paper, we simulated and carried out experiments to measure the stiffness of a dual-beam fibre optical trap unit based on a quartz-substrate. We simulate the stiffness of several Mie particles with different materials and sizes in dual-beam optical trap as well as the relation between the waist radius of fundamental mode Gaussian beam and stiffness. Stiffness measurement experiment is conducted using the residual gravity method. Stiffness values measured in experiments are consistent with the simulation results, which verify the validity and accuracy of the method.