Abstract:Production of substitute natural gas (SNG) by methanation of syngas generated from various carbon sources provides a promising route towards coal clean utilization and sustainable energy future. Monolithic Ni (or Cu, NiCu-alloy)-foam-structured Ni-Al2O3 catalysts were developed by a facile modified wet chemical etching method. The as-prepared catalysts were characterized by X-ray diffraction, scanning electron microscopy, inductively coupled plasma atomic emission spectrometry and H-2-temperature programmed reduction. Among these catalysts, Ni-Al2O3/Ni-foam has the most surface active Ni atoms and exhibits the best catalytic methanation performance, achieving 99.9% CO conversion with 90.0% methane selectivity and being stable for at least 1000 h for a feed gas of H-2/CO (3/1) at 330 degrees C and gas hourly space velocity (GHSV) of 5000 h(-1). Effects of reaction temperature, reaction pressure and GHSV are also investigated on the catalytic performance of Ni-Al2O3/Ni-foam for CO methanation. Computational fluid dynamics calculation and experimental measurement consistently show that such monolithic Ni-Al2O3/Ni-foam can dramatically reduce the "hotspot" temperature due to its high thermal conductivity. Moreover, the feasibility of our Ni-Al2O3/Ni-foam catalyst for co-methanation of a simulated feed gas from coal gasification is studied as well as CO2 methanation in the presence of high CH4 concentration. We anticipate that our present work might stimulate commercial exploitation of the new-generation structured catalyst and reactor technology for the strongly exothermic syngas methanation toward energy-efficient process for SNG production. (C) 2015 Elsevier B.V. All rights reserved.

Ni–Al2O3 Catalysts Prepared by Solution Combustion Method for Syngas Methanation

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Impact of Heating Rate and Solvent on Ni-based Catalysts Prepared by Solution Combustion Method for Syngas Methanation

Study on Methanation Performance of Biomass Gasification Syngas Based on a Ni/Al2O3 Monolithic Catalyst

Na Promoted Ni/γ-Al2O3 Catalysts Prepared by Solution Combustion Method for Syngas Methanation

Catalytic Methanation of Syngas over Ni-based Catalysts with Different Supports

High-Stability ZnAl2O4 Spinel-Supported Nickel Catalyst for High-Temperature Syngas Methanation

Optimized combustion temperature in the facile synthesis of Ni/Al2O3 catalyst for CO2 methanation

High Temperature Methanation over Ni Catalysts Supported on High Surface Area ZnxMg1-xAl2O4: Influence on Zn Loading

Development of Highly Stable Ni-Al 2 O 3 Catalysts for CO Methanation

Metal-foam-structured Ni–Al2O3 Catalysts: Wet Chemical Etching Preparation and Syngas Methanation Performance

Highly efficient NiAl 2 O 4 -free Ni/γ-Al 2 O 3 catalysts prepared by solution combustion method for CO methanation

Mn and Mg Dual Promoters Modified Ni/α-Al2O3 Catalysts for High Temperature Syngas Methanation

Partial Oxidation Of Methane To Syngas Over Ni-Based Catalysts

Ni Based Catalysts Supported on Ce Modified MgAl Spinel Supports for High Temperature Syngas Methanation

Synergistic effect of Ni and NiO in hydrogen reduction for CO methanation

Effect of Al_2O_3 on the Ni-Al_2O_3/SiO_2 Catalysts for the Production of Syngas from Reforming of CH_4 with CO_2 and O_2

Facile preparation of a Ni/MgAl2O4 catalyst with high surface area: enhancement in activity and stability for CO methanation

MoOx-Doped Ordered Mesoporous Ni/Al2O3 Catalyst for CO Methanation

Syngas production employing nickel on alumina‐magnesia supported catalyst via dry methane reforming

Highly active Ni/Al2O3 catalyst for CO2 methanation by the decomposition of Ni-MOF@Al2O3 precursor via cold plasma