Abstract:Dimethyl ether (DME) is a highly reactive diesel substitute that can be used as a pilot fuel to ignite low- reactivity methane (CH4) in heavy-duty engines. To optimize the efficiency and emissions of CH4/DME dual-fuel engines, it is crucial to study the fundamental combustion characteristics of DME mixed with methane. This study focuses on the influence of CH4 addition on the low-temperature oxidation (LTO) preparation stage and the thermal ignition (TI) preparation stage of DME in the two-stage ignition process, as these two stages respectively control the ignition delay of the first and second stages. The comparison is made between pure DME and a 50% CH4 and 50% DME blended fuel, operating under thermodynamic conditions representing the engine in- cylinder environment at 30 atm pressure, 650K temperature, and a stoichiometric equivalence ratio. The results show that the addition of methane hardly affects the control mechanism of the two-stage ignition of DME. Specifically, the LTO preparation stage is still promoted by the increase in OH radicals in the DME’s low-temperature oxygenation pathways to form KET, and the second stage is still controlled by the H2O2 loop mechanism. The kinetic analysis also reveals that methane addition can compete for some of the OH radicals in the LTO preparation stage, which has a suppressing effect on ignition. However, in the TI preparation stage, methane can promote the loop reaction of OH→HO2→H2O2→OH and promote ignition. For the operating conditions studied here, although methane consumes a total of 7.24% prior to thermal ignition, it only consumes 0.63% of the total amount in the LTO preparation stage and 1.81% of the total amount in the TI preparation stage. This indicates that methane is mainly consumed in the LTO stage, accounting for 65% of the total methane consumption amount. It can be concluded that the kinetic effect of methane has a relatively small impact on the ignition delay of the DME, at least for the conditions investigated here. In other words, the dilution and thermal effects caused by adding methane are the main reasons for the prolonged time of LTO/TI preparation. Overall, more fundamental research is warranted to understand the role of methane in the two-stage ignition process of DME, which could facilitate the development of CH4/DME dual-fuel engines.

Effects of DME’s Temperature on Power Performance of a Turbocharged DME Engine

Study of Combustion and Emission Characteristics of Turbocharged Diesel Engine Fuelled with Dimethylether

Experimental study on combustion and performance of a turbocharged DME engine

Combustion and Emission Characteristics of A Turbocharged Diesel Engine Fuelled with Dimethyl Ether

Effects Of Fuel Temperature On Injection Process And Combustion Of Dimethyl Ether Engine

The Combustion Characteristics of Vehicular Turbocharged Dimethyl Ether Engine

Study on injection characteristics of diesel and DME

FL4-1: Experimental Study on Combustion and Performance of a Turbocharged DME Engine(FL: Fuels and Lubricants,General Session Papers)

Parameter Optimization in a Turbocharged Engine Fuelled with Dimethyl Ether

Experimental Study of EGR on Performance and Emissions of a Turbocharged DME Engine

Combustion and performance of heavy-duty diesel engines fuelled with dimethyl ether

Study on the performance and emissions of a compression ignition engine fuelled with dimethyl ether

Combustion and Emission Analysis of DME on Diesel Engine with Inline Pump

Study on the Effect of Different Octane Gasoline on Turbo-charged GDI Engine

Dimethyl ether energy ratio effects in a dimethyl ether-diesel dual fuel premixed charge compression ignition engine

The Effect of Methane Addition on the Low-Temperature Oxidation Preparation and the Thermal Ignition Preparation of Dimethyl Ether under Representative Engine In-Cylinder Thermal Conditions

Investigation of the Performances of Diesel Engine Fueled with Dimethyl Ether and Vehicle Driving Tests

Performance and Emission Characteristics of Dme Engine with High Ratio of Egr

Experimental study of effects of exhaust gas recirculation and combustion mode on combustion, emission, and performance of DME‐methanol ‐fueled turbocharged c ommon‐rail engine

Investigation of Dimethyl Ether Injection Process and Influencing Factors

The Effect of High Altitude Environment on Diesel Engine Performance: Comparison of Engine Operations in Hangzhou, Kunming and Lhasa Cities.