Abstract:This paper is concerned with the design of bracing systems for three-ribbed parabolic arch bridges against out-ofplane buckling. Typical bracing systems for the three-ribbed arch bridges include K-bracing system and X-bracing system as well as transverse bracing system. The buckling criterion of the braced funicular three-ribbed arch bridge is derived from an exact matrix stiffness method (MSM) with a 14 x 14 s-order element stiffness matrix of three-dimensional beam-column elements that allows for torsional and warping deformations. The lateral torsional buckling load and mode are given by the lowest eigenvalue and eigenvector associated with the assembled structural stability stiffness matrix. A comparison study between different bracing system configurations suggests that the three-ribbed arches with the integral K- or X-bracing system (a K/X-bracing across the three arch ribs) have lower lateral torsional buckling loads than their arch counterparts with the independent Kor X-bracing system (the adjacent arch ribs are connected by K/X-bracing respectively), because the latter ones could provide more restraint on the middle arch rib to avoid early lateral torsional instability. Further, a bracing utilization efficiency index (defined as the normalized buckling capacity over material usage for bracing system) is proposed to quantify the effect of bracing systems in improving the lateral torsional buckling capacity of arch bridges. Highly efficient bracing systems that maximize the lateral torsional buckling load of three-ribbed arch structures with the lowest bracing material usage are then recommended.

Out-Of-Plane Elastic Buckling of Circular Arches with Elastic End Restraints

Elastic Lateral–torsional Buckling of Circular Arches Subjected to a Central Concentrated Load

IN-PLANE ELASTIC BUCKLING OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORT

Elastic-plastic Stability of Shear-Deformable Circular Arches

In-plane buckling analysis of the horsizontal spring circular arch under concentrated load at the mid-span

In-Plane Nonlinear Buckling Analysis of Deep Circular Arches Incorporating Transverse Stresses

In-plane Nonlinear Buckling Analysis of Circular Arches Considering Shear Deformation

STUDY FOR IN-PLANE ULTIMATE STRENGTH OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORTS

OUT-OF-PLANE ELASTIC BUCKLING OF CLOSE-SECTION STEEL ARCHES WITH NON-UNIFORM DISTRIBUTED LATERAL BRACINGS

An Experimental Study on Out-of-plane Inelastic Buckling Strength of Fixed Steel Arches

IN-PLANE NONLINEAR ANALYSIS AND BUCKLING OF SHEAR-DEFORMABLE CIRCULAR ARCHES

Out-of-plane Elastic Buckling of I-section Steel Arches Braced Laterally and Design of Bracing Stiffness

Bracing Systems for Three-Ribbed Arch Bridges Against Out-of-plane Buckling

Exact Matrix Stiffness Method for Out-of-Plane Buckling Analysis of Funicular Arches Considering Warping Deformations

Out-of-plane Elastic Buckling Behavior of Hinged Planar Truss Arch with Lateral Bracings

Optimal Bracing System Design for Funicular Twin Arches Against Out-of-plane Buckling

Out-of-plane stability of simply supported beams with knee braces

Threshold Stiffness of Discrete Lateral Bracing for Out-Of-Plane Buckling of Steel Arches

Out-of-plane strength design of spatially trussed arches with a rectangular lattice section

OUT-OF-PLANE STABILITY DESIGN OF PIN-ENDED CIRCULAR STEEL ARCH UNDER PURE COMPRESSION

Elastic out-of-plane buckling load of circular steel tubular truss arches incorporating shearing effects