In-plane Buckling and Design of Two-Hinged Steel Tube Circular Truss-Arches under Pure Compression
GUO Yanlin,GUO Yufei,DOU Chao
DOI: https://doi.org/10.14006/j.jzjgxb.2010.08.008
2010-01-01
Abstract:Until recently,the corresponding stability design method is absent for the lack of researches on the in-plane stability and load-carrying capacity of steel tube truss-arches.In this paper,firstly the expression of sectional shear stiffness is proposed,and the buckling loads and modified slenderness ratio of two-hinged circular arches under pure compression are derived,considering the effects of sectional shear deformation on buckling behavior.Secondly,by adopting finite element numerical method,the buckling analysis of a pure compressive arch is carried out to investigate the influence of different parameters on the elastic buckling behavior of planar and spatial truss-arches,such as sectional height-to-width ratio,rise-to-span ratio,web-member included angle and sectional dimension.It indicates that the buckling loads calculated by the formula derived above are in good agreement with numerical results.Finally,referring to the stability design method of solid webs arch and latticed columns in current Chinese code for steel structures,by elasto-plastic finite element method the interactive ultimate load-carrying capacity of pure compressive truss-arch is studied,considering the influence of member local buckling on global stability.It is found that the ratio between slenderness ratio of intersegmental chord members and that of the whole truss arch is the key factor reflecting that influence.Based on that,the so-called interactive influence coefficient is extracted,as well as stability design curves are proposed for two-hinged pure compression steel tube circular truss-arches.